Toro Titan X5450 Operator's Manual page 20

1. Locknut (5/16 inch)
2. Right baffle
12. Remove the carriage bolt and locknut securing
the right baffle to the top of the mower deck and
remove the right baffle from the mower deck
(Figure 18).
13. Install the fasteners removed previously at the
front holes in the discharge plate and forward
hole in the deck
14. Locate the cutoff baffle in the loose parts bag,
remove the fasteners at the rear holes of the
discharge plate, and install the baffle at the
side-discharge opening on the mower deck
(Figure 19).
Figure 18
3. Welded posts (right baffle)
(Figure 17).
g010704
1. Carriage bolts
2. Rear holes in the
discharge plate
15. Use the fasteners removed to secure the cutoff
baffle to the deck.
16. Install the mower deck; refer to
Mower Deck (page
20
Figure 19
3. Cutoff baffle
4. Locknuts
Installing the
50).
g190735