INTRODUCTION 1. Red LED 11. Battery Cover Emergency Battery 2. Green LED 12. Battery Cover Screw Back Up 3. Wake-up Button 13. ID Label 4. Lock Body 14. Hand Knob Frame 5. Closing Position 15. Cam 6. Knob Indicator 16. Cam Screw 7.
DESCRIPTION: miniK10mc ıt is an electronic combination cabinet lock with features such as easy application on right/left cabinet doors, longer battery life with very low energy consumption, high reliability and working with contactless cards. INITIAL SETUP: • Assign Master card: 1- Press the button, beep is heard with green led flashing repeatedly.
• To Unlock: 1- Press the button for wake the lock up. Only one beep is heard 2- Present User Card or Master Card over the button. (You have to do this action in 4 seconds otherwise red led blinks and the lock sleeps.) 3- Turn the knob to the unlocked position.
CHANGING THE BATTERY: Remove the battery cover on the back of the lock with a screwdriver. Remove the battery from compartment and replace it with 1 new 3V Lithium CR 2450 button battery. If the battery is about to run out, the red light starts to flash immediately after the on/off operation.
OUT OF WARRANTY. LIMITED WARRANTY: VEMUS Ltd. offers a one year limited warranty all products to be free from manufacturing defects in materials and workmanship. This warranty does not cover the battery, lost combinations or damages caused by improper mounting, improper or unreasonable use.
TECHNICAL SPECIFICATIONS: Dimension (WxHxD) 34 x 85 x 27 mm Weight 70,4 g (2.48 oz) (excluding cam and mounting) Key Pad Silicone button with metal dome Operating Temperature +10 / +50 °C (50 - 122 °F) Storage Temperature +0 / +60 °C (32 - 140 °F) Operating Moisture 20% - 80% Rh (without condensation) Replaceable Battery...