Vemus Kilitronik MiniK 10p Operating Manual

Unique electronic cam lock
Hide thumbs Also See for Kilitronik MiniK 10p:

Advertisement

Quick Links

unique
electronic cam lock
cabinets
lockers
boxes
Please read this
manual before using
the miniK 10p

Advertisement

Table of Contents
loading

Summary of Contents for Vemus Kilitronik MiniK 10p

  • Page 1 unique electronic cam lock cabinets lockers boxes Please read this manual before using the miniK 10p...
  • Page 2 INDEX Introduction Initial Setup Assign Master Card Selecting Operation Option Of The mini K10p Assign or Delete Service Cards Assign User Card / Cards Deleting User Card Operating Instructions Individual Operation With Card To Lock / Unlock One Time Use Operation With Card To Lock / Unlock Cardless Individual Operation - Change Password - Unlock With Password...
  • Page 3 INTRODUCTION 1. Red LED 10. Lock Body 2. Green LED 11. Battery Cover 3. Keypad 12. Battery Cover Screw 4. Lock Body 13. ID Label 5. Closing Position 14. Hand Knob Frame 6. Handle Indicator 15. Cam 7. Opening Position 16.
  • Page 4: Initial Setup

    USAGE: Contactless card lock can be used with three types of cards: “User Card, Service Card and Master Card”. Also, the lock can be used with a password by selecting the user card free operation. Service card is passive by default. You should center the card when holding over the handle to enable accurate reading.
  • Page 5 • Assign/Delete Service card / cards: (If you don't need to use any service card, skip this step) 1- Press , present the master card to the handle and press , green and red leds blink. 2- Press 5 for selecting service card assign / delete option. And then Press 0 for All service cards are deleted.
  • Page 6 OPERATING INSTRUCTIONS Individual operation with card (if selected) To Unlock: 1- Press any number button for wake the lock up. 2- Present any assigned user card / master card / service card to the handle in 3 seconds 3- turn the handle to the unlocked position. To Lock: 1- Press any number button for wake the lock up.
  • Page 7 To Unlock: 1- Press any number button for wake the lock up. 2- Present any card / master card / service card to the handle in 3seconds 3- Turn the handle to the unlocked position. Cardless individual operation (if selected) Change Password: (default “1010”) 1- Press and then enter the old password by pressing number buttons,...
  • Page 8 To Lock with Password: (default “1010”). 1- Enter the user password. 2- Turn the handle to the locked position. USER PASSWORD To Lock with Card: 1- Press button for wake the lock up. 2- Present master card to the handle in 3 seconds 3- Turn the handle to the locked position.
  • Page 9 To Unlock with Password: 1- Enter the same password with locking operation. 2- Turn the handle to the unlocked position. ONE TIME PASSWORD To Unlock with Cards: 1- Press button for wake the lock up. 2- Present master card / service card to the handle in 3 seconds 3- Turn the handle to the unlocked position.
  • Page 10: Programming Instructions

    PROGRAMMING INSTRUCTIONS 1- Press , present the master card and then press , green and red leds blink. 2- Enter the program number to be customized and then enter the selected settings number. (Press Program Number and then Selection Number) Restore Default Settings: Press 0 - 1 Default Settings are : One time use operation with card, audible operation, penalty operation is not...
  • Page 11 Locking with password / card: Press 6 - 0 Locking operation require a password / card to lock. Automatic Locking (without password/card): Press 6 - 1 Locking operation does not require a password / card to lock. Warning of open door : Press 7 - 1 After door is open for one minute, lock gives an audible warning to user with 8 beeps every 5 seconds to notify user that the door has been left open.
  • Page 12 Factory Settings Prg No 1-1: One time use operation with card Prg No 2-1: Audible beeps and confirmations Prg No 3-0: Penalty operation PASSIVE Prg No 4-0: Delete all user card Prg No 5-0: Service card PASSIVE Prg No 6-0: Locking with password Prg No 7-0: Warning of open door PASSIVE Prg No 8-0: Resetting User Password with Service card usage PASSIVE Prg No 9-0: Lock block PASSIVE (if service card is active)
  • Page 13: Maintenance

    MAINTENANCE: - Clean front of lock with a mild damp cloth with detergent if needed. - Do not use any hard or scratching cleanser. - Do not clean with chemical materials that melt plastic (thinner, acetone, etc.) - Be careful not to spill water on lock. GENERAL WARNINGS: - Read manual before using lock.
  • Page 14: Limited Warranty

    LIMITED WARRANTY: Kilitronik offers a one year limited warranty all products to be free from manufacturing defects in materials and workmanship. This warranty does not cover the battery, lost combinations or damages caused by improper mounting, improper or unreasonable use. LIABILITY LIMITS: This is a limited warranty and is in lieu of all other warranties (including the implied warranties of merchantability and fitness for use) and under no...
  • Page 15: Quick Info

    QUICK INFO LOCKING / UNLOCKING WITH USER CARD LOCKING / UNLOCKING WITH MASTER CARD If cardless individual operation option or cardless one time use operation option is selected , you should press button at first to lock and unlock by using the master card.
  • Page 16 Hospitals Schools Baths Mailboxes eco-friendly Sports Halls Staff Lockers www.kilitronik.com Vemus Endüstriyel Elektronik San. Ve Tic. Ldt. fiti. NOSAB . Zeytin C.14 16140 Nilufer / BURSA Phone : 90 224 411 10 30 : 90 224 411 10 31...

Table of Contents