INDEX Introduction ......................... 3 Description.......................... 4 Initial Setup ......................... 4 Assign Master Card ......................4 Locker Mode Operation with Card To Lock/Unlock ............4 • To Lock With Any Card ..................4 • To Unlock With Any Card ..................5 Changing the Battery ......................
INTRODUCTION 1. Red LED Emergency 11. Battery Cover Battery 2. Green LED 12. Battery Cover Screw Back Up 3. Wake-up Button 13. ID Label 4. Lock Body 14. Hand Knob Frame 5. Closing Position 15. Cam 6. Handle Indicator 16. Cam Screw 7.
DESCRIPTION: Besides the stylish and enriching design of the miniK10mc cabinet lock, there are various features that make the lock different from others, such as allowing to use with wet hands, easy and quick installation at wood and steel cabinets, easy application at existing cabinets, easy application at right/left cabinet doors, higher battery life with very low energy consumption, high reliability and operating with a contactless card.
• To Unlock: 1- Press the button for wake the lock up. Only one beep is heard 2- Present user card / master card over the keypad. (You have to do this action in 4 seconds otherwise red led blinks and the lock sleeps.) 3- Turn the handle to the unlocked position.
CHANGING THE BATTERY: Remove the battery cover on the back of the lock with a screwdriver. Remove the battery from compartment and replace it with 1 new 3V Lithium CR 2450 button battery. If the battery is about to run out, the red light starts to flash immediately after the on/off operation.
OUT OF WARRANTY. LIMITED WARRANTY: VEMUS Ltd. offers a one year limited warranty all products to be free from manufacturing defects in materials and workmanship. This warranty does not cover the battery, lost combinations or damages caused by improper mounting, improper or unreasonable use.