Yamaha DSP-A2070 Operation Manual page 17

CONNECTING TO S VIDEO JACKS
If your video cassette recorder, video disc player, etc. and your
monitor are equipped with "S" (high-resolution) video terminals,
connect them to this unit's S VIDEO jacks, and connect this unit's
S VIDEO MONITOR OUT jack to the "S" video input of your monitor.
Otherwise, connect the composite video jacks from your video
cassette recorder, video disc player, etc. to the VIDEO jacks of this
unit, and connect this unit's VIDEO MONITOR OUT jack to the
composite video input of your monitor.
NOTE: If video signals are sent to both S VIDEO input and VIDEO
input jacks, the signals will be sent to their respective output jacks
independently.
NOTE: If your unit is the General Model, be sure the VIDEO
NTSC/PAL switch has been correctly set to the standard that your
video equipments employ. U.S. and Canadian models have no switch
and use the NTSC standard, while other models without a switch use
the PAL standard.
Notes about the Video superimpose
If you watch a video source that is connected to both S VIDEO and
VIDEO input jacks of this unit, signals of screen display information
are output from only the S VIDEO MONITOR OUT jack.
When no video signal is input to either S VIDEO or VIDEO input
jacks of this unit, signals of screen display information are output
from both S VIDEO MONITOR OUT and VIDEO MONITOR OUT
jacks with a color background.
* For the General Model, if the NTSC/PAL switch on the rear panel
is set to "PAL", nothing will be output from either S VIDEO
MONITOR OUT or VIDEO MONITOR OUT jack in this case.
Video disc player
VIDEO S-VIDEO
OUT OUT
Video cassette recorder 2
TV/Satellite tuner
VIDEO S-VIDEO
OUT OUT
VIDEO OUT
S-VIDEO OUT
VIDEO IN
S-VIDEO IN
Video cassette recorder 1
Video cassette recorder 3
Monitor TV
15