Replacing The Bulb; Maintenance Of The Chimney Hood; If Chimney Hood Does Not Work - Samsung NK24N7060VB User Manual

7. REPLACING THE BULB

1
2
Figure 12
Note: Remove the holder on the LED bulb as shown in Figure 12.2. Put the
new LED bulb on the holder housing of the LED bulb you removed as shown
in Figure 12.1.

8. MAINTENANCE OF THE CHIMNEY HOOD

• Device should be unconnected or switch should be turned off before
cleaning and maintenance procedu
• Metal filter should be cleaned once a month with hot soapy water or
in the dishwasher, if possible. (60 °C)
• Remove the aluminum cartridge filter by pressing on the spring
catches on the side. Do not refit before drying after wash.
• Outer surface of the extractor hood should be wiped with a damp
cloth soaked with soapy water.
• Make sure electronic parts do not contact with water or similar
materials.
• For inox products, using inox cleaning and maintenance products
available in the market will provide longer usage life for your device.
• Aluminum filters can be washed in dishwasher . After several washes,
aluminum filters may change colour . This is normal and filters do not need
to be replaced.
• For Replacement of LED Lamp, contact the technical service.
WARNING: When used with devices which use fuel (heaters working
with gas, diesel fuel, coal or firewood, water heaters, etc) and the air in the
environment; should be used cautiously. The chimney hood sending the air
out in the environment may affect the burning adversely.
This warning is not applicable to non-ducted use.
8 English
Always switch off the electrical
supply before carrying out
any operation
LED bulb does not operate is
possible to remove as shown
in Figure 12
A new bulb to be supplied
from service points is replaced
with the same reoperation.
Cables are designed with
sockets.
Efficient Use Of Chimney Hood;
• When installing the chimney hood to the air duct, use 150/120 mm
diameter pipes and use bends as minimum as possible.
• Be ware of cleaning periods of metal filters and replacing times of
charcoal filters.
• When dense suction power is not required, use the product in
medium setting.
• For right ventilation, the windows in the kitchen leading to the
outside should be kept closed.

9. IF CHIMNEY HOOD DOES NOT WORK;

Before contacting the service, make sure the product is connected and the
fuse in the electrical installation is working. Do not do anything that may
harm the product.
Chimney Hood
does not work
Light bulb is
not working
Chimney hood air
suction is poor
Do not send air out
(in non-ducted
cases)