Table of Contents
Advertisement
Quick Links
Owner's Instruction and Operation Manual
Model Number:
SW1.8
Report Number: F19-552
Certified to: UL1482-2022, ULC-S628-93
* All Pictures In This Manual Are For Illustrative Purposes Only. Actual Product May Vary.
SAFETY NOTICE: If this heater is not properly installed, a house fire may result. For your
safety, follow the installation instructions. Never use make-shift compromises during the
installation of this heater. Contact local building or fire officials about permits, restrictions
and installation requirements in your area. NEVER OPERATE THIS PRODUCT WHILE
UNATTENDED.
CAUTION! Please read this entire manual before you install or use your new room
heater. Failure to follow instructions may result in property damage, bodily injury, or
even death. Improper Installation Will Void Your Warranty!
U.S. Environmental Protection Agency
Certified to comply with 2020 particulate
emissions standards.
© 2024 Breckwell Hearth, South Pittsburg, TN 37380
R
Save These Instructions In A Safe Place For Future Reference.
THIS MANUAL IS SUBJECT TO CHANGE WITHOUT NOTICE.
CALIFORNIA PROPOSITION 65 WARNING:
This product can expose you to chemicals including carbon
monoxide, which is known to the State of California to cause
cancer, birth defects, and/or other reproductive harm. For
more information, go to
PH. 423-403-4031
853662D-1002N
www.P65warnings.ca.gov
Advertisement
Table of Contents
Related Manuals for Breckwell SW1.8
Summary of Contents for Breckwell SW1.8
- Page 1 State of California to cause emissions standards. cancer, birth defects, and/or other reproductive harm. For more information, go to www.P65warnings.ca.gov THIS MANUAL IS SUBJECT TO CHANGE WITHOUT NOTICE. © 2024 Breckwell Hearth, South Pittsburg, TN 37380 PH. 423-403-4031...
- Page 2 The instructions pertaining to the installation of your wood stove comply with UL-1482-2022 and ULC-S628-93 standards. This manual describes the installation and operation of the Breckwell, SW1.8 wood heater. This heater meets the 2020 U.S. Environmental Protection Agency’s crib wood emission limits for wood heaters sold after May 15, 2020. Under specific test conditions this heater has been shown to deliver heat at rates ranging from 9,487 to 33,050 Btu/hr output (*1.8 g/hr and...
-
Page 3: Installation Checklist
Your wood stove should be installed by a qualified installer only. An NFI qualified Installer can be found at; www.nficertified.org/public/find-an-nfi-pro/ For customer service, please contact your Breckwell dealer. COMMISSIONING CHECKLIST This checklist is to be completed in full by the qualified person who installs this unit. Keep this page for future reference. -
Page 4: Firebrick Installation
COMBUSTION AIR WILL RESULT IN A LAZY FIRE WHICH • NEVER OPERATE THIS APPLIANCE WITH MISSING OR CAUSES SOOT OR CREOSOTE BUILDUP AND GREATLY CRACKED FIREBRICK. REDUCES EFFICIENCY. • KEEP FURNISHINGS AND OTHER COMBUSTIBLE MATERIALS AWAY FROM THE STOVE AND OUTSIDE MINIMUM CLEARANCES. © 2024 Breckwell Hearth... -
Page 5: Clearances To Combustibles
3. Chimney Caps. Mesh type chimney caps and spark arrestors must be able to be removed for regular inspection and cleaning. Otherwise the mesh should be removed to prevent possible plugging. Check your local fire and building codes. © 2024 Breckwell Hearth... - Page 6 (3 ft.), and minimum height (2 ft.) above highest point of inspection and cleaning must be roof within a 10 ft. diameter from the chimney. The chimney maintained. Masonry Fireplace must also meet minimum and maximum cross sectional © 2024 Breckwell Hearth...
-
Page 7: Chimney Draft
Take into account the chimney’s location to connector joints. An uncontrollable burn or excessive ensure it is not too close to neighbors or in a valley which temperature indicates excessive draft. may cause unhealthy or nuisance conditions. © 2024 Breckwell Hearth... -
Page 8: Important Installation Points
THE CLASS 3 REQUIREMENTS OF CAN/ULC-S635, STANDARD FOR LINING SYSTEMS FOR EXISTING MASONRY, OR CAN/ULC-S640, STANDARD FOR LINING SYSTEMS FOR NEW MASONRY CHIMNEYS. • PERMANENTLY SEAL ANY OPENING BETWEEN THE MASONRY OF THE FIREPLACE AND THE FACING MASONRY. © 2024 Breckwell Hearth... - Page 9 • NEVER OPERATE WITH SECONDARY TUBES, 2. Lawn clippings or yard waste; FIBERBOARD, OR INSULATION REMOVED. 3. Materials containing rubber, including tires; 4. Materials containing plastic; 5. Waste petroleum products, paints or paint thinners, or asphalt products; © 2024 Breckwell Hearth...
-
Page 10: Testing Your Wood
PAINT WHICH REQUIRES A SERIES OF LOW TO MEDIUM • blackened windows BURNS TO FULLY CURE FOR DURABILITY AND A LIFETIME • incomplete log combustion OF SERVICE. Do not burn manufactured logs made of wax impregnated sawdust or logs with any chemical additives. -10- © 2024 Breckwell Hearth... -
Page 11: Fueling Instructions
On top of the newspaper, lay 2 lbs of kindling in random placement to ensure airflow through the kindling. On top of the kindling, place approximately 3 to 4 lbs of -11- © 2024 Breckwell Hearth... -
Page 12: Blower Operation
Learn to adjust the air settings of your specific unit to produce the smallest amount of visible smoke. Wood that has not been seasoned properly and has a high wood moisture content will produce excess visible smoke and burn poorly. -12- © 2024 Breckwell Hearth... -
Page 13: Chimney Maintenance
The secondary combustion can only take cinders have thoroughly cooled. place if the firebox is hot enough. • Always check for creosote deposit once every two months and have your chimney cleaned at least once a year. -13- © 2024 Breckwell Hearth... -
Page 14: Glass Care
GLASS. • Never wash the glass with a product that may scratch. Use a specialized product, available in the stores where wood stoves are sold. The glass should be washed only when cold. -14- © 2024 Breckwell Hearth... -
Page 15: Wiring Diagram
Other information that may be needed would be the part number and part description of the item(s) in question. Part numbers and descriptions can be found in the “Repair Parts” section of this manual. Once this information has been gathered you can contact your Breckwell dealer or visit www.Breckwell.com Model Information Model Number Dealer’s Name... -
Page 16: Repair Parts
Contact your dealer or installer for parts and service. IN ORDER TO MAINTAIN WARRANTY, COMPONENTS MUST BE REPLACED USING ORIGINAL MANUFACTURERS PARTS PURCHASED THROUGH YOUR DEALER OR DIRECTLY FROM THE APPLIANCE MANUFACTURER. USE OF THIRD PARTY COMPONENTS WILL VOID THE WARRANTY. -16- © 2024 Breckwell Hearth... - Page 17 Contact your dealer or installer for parts and service. IN ORDER TO MAINTAIN WARRANTY, COMPONENTS MUST BE REPLACED USING ORIGINAL MANUFACTURERS PARTS PURCHASED THROUGH YOUR DEALER OR DIRECTLY FROM THE APPLIANCE MANUFACTURER. USE OF THIRD PARTY COMPONENTS WILL VOID THE WARRANTY. -17- © 2024 Breckwell Hearth...
-
Page 18: Service Record
Engineer Name: _________________________________ Engineer Name: _________________________________ License No.: _____________________________________ License No.: _____________________________________ Company: ______________________________________ Company: ______________________________________ Telephone No.: __________________________________ Telephone No.: __________________________________ Stove Inspected: Chimney Swept: Stove Inspected: Chimney Swept: Items Replaced: __________________________________ Items Replaced: __________________________________ -18- © 2024 Breckwell Hearth...