Advertisement
Installation
Mounting
Wrap the pole straps around pole,
Note
inserting the ends into the
tightening mechanisms.
Tighten the pole straps with a #2
Phillips head screwdriver. A power
drill is recommended to achieve
a tighter grip on the pole.
Flat Surface Mounting
For drywall use the provided wall
anchors. For masonry use
appropriate anchors. Use the
relevant hole pattern on the
injector mount plate and the
provided fasteners to attach the
mount plate to a flat surface.
6
Verkada Inc. 406 E. 3rd Ave, San Mateo, CA 94401
sales@verkada.com
All specifications are subject to change without notice
Copyright © 2024 Verkada Inc. All rights reserved.
Advertisement
