Advertisement

Quick Links

ESS87300SX
ESS87300SW
EN
Dishwasher
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ESS87300SX and is the answer not in the manual?

Questions and answers

Summary of Contents for Electrolux ESS87300SX

  • Page 1 ESS87300SX ESS87300SW Dishwasher User Manual...
  • Page 2: Table Of Contents

    14. ENVIRONMENTAL CONCERNS..............27 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
  • Page 4: Safety Instructions

    (average) domestic usage levels. Do not change the specification of this appliance. • The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 10 (1.0) bar (MPa) Follow the maximum number of 13 place settings.
  • Page 5 ENGLISH • Make sure that the parameters on the • If the water inlet hose is damaged, rating plate are compatible with the immediately close the water tap and electrical ratings of the mains power disconnect the mains plug from the supply.
  • Page 6: Product Description

    2.6 Disposal peripherals such as baskets and lids. • Concerning the lamp(s) inside this...
  • Page 7: Control Panel

    ENGLISH • When the appliance has a When AirDry is activated malfunction, the red light flashes. during the drying phase, the Beam-on-Floor is off when projection on the floor may the appliance is deactivated. not be completely visible. To see if the cycle is finished, check the control panel.
  • Page 8 Programme Dishwasher Degree of Programme phases Options load soil Crockery, Normal to • Prewash • Extra Power 160 min cutlery, pots, heavy, • Dishwashing 60 °C • Glass Care pans dried-on • Intermediate rinse • Extra Hygiene • Final rinse 60 °C •...
  • Page 9 ENGLISH Programme Dishwasher Degree of Programme phases Options load soil Crockery, • Prewash cutlery, pots, • Dishwashing 50 - pans 60 °C • Intermediate rinse • Final rinse 60 °C • Drying • AirDry 1) This programme offers the most efficient use of water and energy consumption for crock‐ ery and cutlery with normal soil.
  • Page 10: Settings

    Water (l) Energy (kWh) Duration (min) 1) 2) Programme 11.9 0.960 1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values.
  • Page 11 ENGLISH water softener to assure good washing results. Water hardness German de‐ French de‐ mmol/l Clarke de‐ Water softener lev‐ grees (°dH) grees (°fH) grees 47 - 50 84 - 90 8.4 - 9.0 58 - 63 43 - 46 76 - 83 7.6 - 8.3 53 - 57...
  • Page 12 6.3 The rinse aid empty the total duration of a programme by additional 5 minutes. notification Subsequently, the rinsing of the water The rinse aid helps to dry the dishes softener that lasts 5 minutes may begin without streaks and stains. It is...
  • Page 13 ENGLISH 1. Press • The indicators are off. • The indicator still flashes. • The display shows the current setting: e.g. = level 4. – The levels of rinse aid range from 0A to 6A where 0A means no rinse aid is used. 2.
  • Page 14: Options

    3. Press on/off to confirm the setting. – = AirDry is activated. 2. Press to change the setting. 7. OPTIONS The related indicator is on. Desired options must be The display shows the updated activated every time before programme duration.
  • Page 15: Daily Use

    ENGLISH washing phase starts only after this CAUTION! procedure is complete. The procedure is Water and salt can come out repeated periodically. of the salt container when 8.1 The salt container you fill it. After you fill the salt container, immediately CAUTION! start the shortest programme Use rough salt designed for...
  • Page 16 • If the salt indicator is on, fill the The upper ends of the two salt container. vertical ribs inside the • If the rinse aid indicator is on, fill compartment (B) indicate the rinse aid dispenser. the maximum level for filling 3.
  • Page 17: Hints And Tips

    ENGLISH The indicator is on. Cancelling the programme 3. Close the appliance door to start the Press and hold simultaneously countdown. During the countdown, it is possible to until the appliance is increase the delay time but not to change in programme selection mode.
  • Page 18 • You can use dishwasher detergent, • Make sure that the water softener rinse aid and salt separately or you level is correct. If the level is too high, can use the multi-tablets (e.g. ''All in the increased quantity of salt in the 1'').
  • Page 19: Care And Cleaning

    ENGLISH 10.5 Before starting a • The correct quantity of detergent is used. programme 10.6 Unloading the baskets Before you start the selected programme, make sure that: 1. Let the tableware cool down before • The filters are clean and correctly you remove it from the appliance.
  • Page 20 5. Make sure that there are no residues of food or soil in or around the edge 1. Turn the filter (B) counterclockwise of the sump. and remove it. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides.
  • Page 21 ENGLISH 11.5 Cleaning the lower spray 11.6 Cleaning the upper spray We recommend to clean the lower spray We recommend to clean the upper spray arm regularly to prevent soil from arm regularly to prevent soil from clogging the holes. clogging the holes.
  • Page 22: Troubleshooting

    1. Move the upper basket to the lowest level to reach the spray arm more easily. 2. To detach the spray arm (C) from the delivery tube (A), turn the mounting element (B) counterclockwise and pull the spray arm downwards.
  • Page 23 ENGLISH Problem and alarm code Possible cause and solution You cannot activate the • Make sure that the mains plug is connected to the appliance. mains socket. • Make sure that there is no damaged fuse in the fuse box. The programme does not •...
  • Page 24 Problem and alarm code Possible cause and solution The level of water inside • Switch the appliance off and on. the appliance is too high. • Make sure that the filters are clean. The display shows iF1. • Make sure that the outlet hose is installed at the right height above the floor.
  • Page 25 ENGLISH For alarm codes not described in the WARNING! table, contact an Authorised Service We do not recommend using Centre. the appliance until the problem has been completely fixed. Unplug the appliance and do not plug it in again until you are certain that it operates correctly.
  • Page 26: Technical Information

    Problem Possible cause and solution There are residues of deter‐ • The detergent tablet was stuck in the dispenser gent in the dispenser at the and was not washed away by water. end of the programme. • Water cannot wash away the detergent from the dispenser.
  • Page 27: Environmental Concerns

    ENGLISH Capacity Place settings 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to decrease energy consumption. 13.1 Link to the EU EPREL EPREL database using the link https:// eprel.ec.europa.eu and the model name database...
  • Page 28 www.electrolux.com/shop...

This manual is also suitable for:

Ess87300sw

Table of Contents