Table of Contents
Advertisement
SETUP AND INSTALLATION
5.
Click "Properties".
6.
Type in the IP address and Subnet mask, then press "OK".
7.
Press the "Menu" button on the projector.
Open on projector Network > LAN.
8.
9.
Enter the following connection parameters:
±
DHCP: Off
±
IP Address: 192.168.0.100
±
Subnet Mask: 255.255.255.0
±
Gateway: 192.168.0.254
±
DNS: 192.168.0.51
10.
Press "Enter" to confirm settings.
11.
Open a web browser, for example Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher
installed.
12.
In the Address bar, input the projector's IP address: 192.168.0.100.
13.
Press "Enter".
The projector is setup for remote management. The LAN / RJ45 function displays as follows:
53
English
Advertisement
Table of Contents
