M
ENU
The FT-8900R Set (Menu) mode, already described in parts of many previous chapters, is
easy to activate and set. It may be used for configuration of a wide variety of transceiver
parameters, some of which have not been detailed previously. Use the following procedure
to activate the Set (Menu) mode:
1. Press the [ SET ] key momentarily to enter the Set mode.
2. Turn the "Main" band DIAL knob to select the Menu Item to be adjusted.
3. Press the "Main" band DIAL knob momentarily to enable adjustment of the selected
Menu item, then rotate the "Main" band DIAL knob to perform the actual adjustment.
4. After completing your selection and adjustment, press and hold in the "Main" band
DIAL knob for 1/2 second to exit the Set mode and exit to normal operation.
1) The "h" character which is in front of the menu number denotes "Enable to
provide the individual values for each Hyper Memory Channel."
2) The "b" character which is in front of the menu number denotes "Enable to provide
the individual values for each Operating Band and Mode (VFO, Memory Channel, and
Home Channel)."
58
S
M
ET
ODE
FT-8900R Operating Manual