Related Manuals for SetonixSynth Sands of Time
Summary of Contents for SetonixSynth Sands of Time
- Page 1 Sands of Time Filtered Noise Source - User’s Manual for Eurorack Copyright 2024 SetonixSynth. All rights reserved.
- Page 2 The stripe on the bottom of the power header and the “-12V” label indicate the location of this rail on the module. The Sands of Time has reverse diode protection so plugging it in backwards will probably not destroy the module or case;...
- Page 3 These two noise sources are available as full-spectrum outputs via their respective labeled output jacks, but they are also routed to the Sands of Time’s onboard bandpass filter, which provides a great deal of sonic depth when applied to either or both noise sources, selectable via the module’s three-position switch.
- Page 4 mids will probably be the most useful range). Manual sweeps or slow-attack modulation of the VCA will create cool “bowed” violin-type sounds as the resonator is subtly excited by the noise. “Stepped Random” Patch the Analog noise output into the signal input of a Sample & Hold module. Use the S+H’s output to modulate the frequency of a VCO, cutoff of a filter, the Rise/Fall CV inputs of a Slope generator, you name it.
Need help?
Do you have a question about the Sands of Time and is the answer not in the manual?
Questions and answers