EVERGLIDE LITE 75 - Hot Swappable Triple-Mode Wired Mechanical Gaming Keyboard DIY Kit Manual

Table of Contents

Contents

1 Overview
2 SHORTCUTS
3 BACKLIGHT SETTINGS
4 CONNECTION
5 CHANGE RGB EFFECTS
6 PAIRING BLUETOOTH
7 PAIRING WIRELESS 2.4GHz
8 PRODUCT SPECIFICATIONS
9 REPLACING KEYCAPS AND SWITCHES
- 9.1 Remove Switches
- 9.2 Install Switches
10 TECHNICAL ASSISTANCE
11 Documents / Resources
- 11.1 References
- 11.2 Download manual

Overview

Should you require more assistance, please email us at support@epomaker.com

SHORTCUTS

FN + F1	My Computer	FN + F9	Mute
FN + F2	Home Page	FN + F10	Volume -
FN + F3	Calculator	FN + F11	Volume +
FN + F4	Player	FN + F12	Mailbox
FN + F5	Previous Track	PRESS KNOB	Play/Pause
FN + F6	Next Track	FN+WIN-L	Win lock
FN + F7	Play/Pause	FN+ESC (HOLD- ING FOR 3S)	Reset the keyboard
FN + F8	Pause

BACKLIGHT SETTINGS

FN+DEL	Backlight on/off	FN+CTRL-R	Toggle underglow lights
FN +↑	Backlight Brightness +	FN+ =+	Backlight speed +
FN +↓	Backlight Brightness -	FN+ -_	Backlight speed -
FN +←	Change backlight direction	FN+INS	Toggle RGB effects
FN +→	Change Backlight Color	FN+SPACEBAR	Toggle RGB lights

CONNECTION

FN+1!	Bluetooth 5.0 Device 1
FN+2@	Bluetooth 5.0 Device 2
FN+3#	Bluetooth 5.0 Device 3

CHANGE RGB EFFECTS

Pressing Fn+INS to switch the RGB effect of your Everglide 75% keyboard kit.

PAIRING BLUETOOTH

Turn on the switch on the back of the keyboard to make sure that the keyboard is under the wireless mode:

Holding Fn+1/2/3 for 3-5 seconds till the backlight flashes fast, the keyboard is ready to pair.

Press Fn+1/2/3 to toggle between the bluetooth devices 1/2/3.

PAIRING WIRELESS 2.4GHz

Switch to the 2.4G mode at the back of the keyboard.

Insert the USB dongle, the connection will be completed.

PRODUCT SPECIFICATIONS

MODEL	EVERGLIDE LITE 75 KIT
KEYS AMOUNTKEYS	82 KEYS
STABILIZER TYPE	PLATE-MOUNTED
PCB TYPE	HOTSWAP PCB
PLATE MATERIAL	PC
BATTERY CAPACITY	8000mAh
CONNECTIVITY	TYPE-C WIRED & BLUETOOTH, 2.4GHZ WIRELESS
ANTI-GHOST KEY	NKRO in all modes
DIMENSION	330 x 137 x 30 mm
WEIGHT	Around 0.83kg

REPLACING KEYCAPS AND SWITCHES

For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser: https://epomaker.com/blogs/guides/diy-guide-how-to-remove-and-replace-your-mechanical-keyboard-switches

Before installing switches, be sure the pins are clean and straight.

Push Straight Down
Please be gentle. Be sure the pins are aligned with the slots.

Included Tools

REPLACING KEYCAPS AND SWITCHES - MECHANICAL SWITCH

Remove Switches

Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the example graphic above.
Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
Using firm but gentle force, pull the switch away from the keyboard using a vertical motion.

Install Switches

Check that all the switch metallic pins are perfectly straight and clean.
Align the switch vertically to have the Gateron logo facing north. The pins should align themselves to the keyboard PBC.
Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
Inspect the switch to ensure it's properly attached to your keyboard, and test it.

warning Note: If the key doesn't work its possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process.

Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.

TECHNICAL ASSISTANCE

For technical assistance, please email to
support@epomaker.com with your purchase order number and a detailed description of your issue.

We normally respond to enquiries within 24 hours. If you purchased your keyboard from a distributor or not from any official store of Epomaker, please contact them directly for any additional help.

COMMUNITY FORUMS
Join our community and learn together with other keyboard enthusiasts.
https://discord.gg/2q3Z7C2
https://www.reddit.com/user/epomaker/