Advertisement
SHORTCUTS
| FN + O | Long press 5s to restore the default setting |
| FN + V | User-defined Mode 1 |
| FN + B | User-defined Mode 2 |
| FN + N | Standard Layer |
| FN + M | Switch to Mac mode |
| FN + DEL | Mute |
| FN + LEFT CTRL | Battery Status (green for high and red for low) |
| FN + SPACEBAR | Calculator |
| FN + PAGE UP | VOL- |
| FN + PAGE DOWN | VOL+ |
| FN + SPACE | Play/Pause |
| FN + ← | Last Song |
| FN + → | Next Song |
| FN + WIN | Long press for 5s to Lock/Unlock Win key |
| DOUBLE-CLICK THE SPACEBAR | Wake keyboard up from sleep |
CONNECTION
| FN + U | USB-C Long press 5s to set keyboard to USB mode |
| FN + R | Bluetooth Device 1 Short press to switch, long press 5S to enter Bluetooth device 1 |
| FN + T | Bluetooth Device 2 Short press to switch, long press 5S to enter Bluetooth device 2 |
| FN + Y | Bluetooth Device 3 Short press to switch, long press 5S to enter Bluetooth device 3 |
| FN + F | Bluetooth Pairing |
BACKLIGHT SETTINGS
| FN + TAB | Toggle backlight effects |
| FN + CAPSLOCK | Toggle underglow effects |
| FN + BACKSPACE | Turn on/off the RGB |
| FN + K | Long press for 5s to turn off the RGB (Wireless mode) |
| FN + H | Turn off the lights in wireless mode |
| FN + ↑ | Brightness+ |
| FN + ↓ | Brightness- |
FUNCTION GUIDE
CHANGE RGB EFFECTS
Pressing FN+Tab at the same time allows you to switch the RGB effect of your Everglide SK68 keyboard kit.
PAIRING BLUETOOTH
Long Press FN+R/T/Y for 3 seconds, the keyboard will start pairing, the light will flash and stays on 10s. If there's no connection, the keyboard will enter into sleep mode.
DRIVER RUNTIME ENVIRONMENT
Windows 7 or later, Windows 10 is recommended.
PRODUCT SPECIFICATIONS
| NUMBER OF KEYS | 68 KEYS |
| HOT-SWAP | YES |
| BACKLIGHT | RGB BACKLIGHT |
| CONNECTION | USB-C, BLUETOOTH 5.0 |
| COMPATIBILITY | WINDOWS/MAC |
| BATTERY | 6000mAh |
| PRODUCT WEIGHT | AROUND 0.65KG |
| PRODUCT DIMENSIONS | 329 x 116 x 31 m |
REPLACING KEYCAPS AND SWITCHES
For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser:
https://epomaker.com/blogs/guides/diy-guide-how-to-remove-and-replace-your-mechanical-keyboardswitches
Before installing switches, be sure the pins are clean and straight.
Push Straight Down
Please be gentle. Be sure the pins are aligned with the slots.
Included Tools
Mechanical Switch
Example of a switch as seen from top after you remove the keycap to prepare for switch removal.
The Switch Puller tool aligns Vertically to the Switch to unclip the plastic securing the switch to the plate.
Remove Switches
- Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the example graphic above.
- Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
- Using firm but gentle force pull the switch away from the keyboard using a vertical motion.
Install Switches
- Check that all the switch metallic pins are perfectly straight and clean.
- Align the switch vertically to have the Gateron logo facing north. The pins should align themselves to the keyboard PBC.
- Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
- Inspect the switch to ensure it's properly attached to your keyboard, and test it.
Note: If the key doesn't work its possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process.
Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.
TECHNICAL ASSISTANCE
For technical assistance, please email to support@epomaker.com with your purchase order number and a detailed description of your issue.
We normally respond to enquiries within 24 hours. If you purchased your keyboard from a distributor or not from any official store of Epomaker, please contact them directly for any additional help.
COMMUNITY FORUMS
Join our community and learn together with other keyboard enthusiasts.
https://discord.gg/2q3Z7C2
https://www.reddit.com/r/Epomaker/
Made in China
Manufacturer: Shenzhen Changyun Technology Co., Ltd.
Address: Seventh Floor, Kai Daer Building, No.168 Tongsha Road, Xili Street, Nanshan Disctrict, Shenzhen, Guangdong, CN
Email: support@epomaker.com
Web: www.epomaker.com
APEX CE SPECIALISTS LIMITED
Address: UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD CORK, T23 AT2P, IRELAND
Contact: Wells
Tel: +353212066339
Email: info@apex-ce.com
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download EVERGLIDE SK68 - Hot-Swap Wired/Wireless Mechanical Keyboard Manual
Advertisement
Need help?
Do you have a question about the SK68 and is the answer not in the manual?
Questions and answers