Xerox CSX 2000 Supplementary Manual page 12

Step and Repeat - Cut and Stack Option
Program the job
Enter parameters according to the following table:
Without Crop Marks
Parameters
Set to Step & Repeat and check the
Method
"cut and stack"
Template
Set to 2x1 Duplex Rotated
Fit to sheet
Do not Check the
Trim Size
Change to Custom
and set: H = 11.0; W = 8.3
Marks
Check that Crop Marks
Margins
Set Spine Trim Size = 0.0
M i n i m u m G u t t e r
Minimum Margin
Verify your programming:
Select the Template parameter.
The dynamic thumbnail allows you
to visually check your job,
while it highlights conflicts in red.
The Letter sized pages should now
be placed correctly on the Tabloid sheet.
Submit the job
Press the button to submit the job to
the queue.
With Crop Marks
Set to
option the "cut and stack"
Set to
Fit to sheet box Do not Check the
Change to
and set:
Select
are not selected
Set
S i z e = 0 . 4 M i n i m u m
Size = 0.0 Minimum
Imposition made easy
Step & Repeat and check
option
2x1 Duplex Rotated
Fit to sheet box
Custom
H = 11.0; W = 8.3
Crop Marks
Spine Trim Size = 0.0
0 . 4
G u t t e r S i z e =
Margin Size = 0.2
Imposition
Method Step & Repeat
Template
2X1 Dup Rotated
Size Custom (11.0, 8.3)
Marks
None
Margins (0.0, 0.0, 0.0)
Creep (0.0, 0.0)
With Crop Marks & Fit to sheet
Set to Step & Repeat and check
the "cut and stack" option
Set to 2x1 Duplex Rotated
Check the Fit to sheet box
Letter
Select Crop Marks
Set Spine Trim Size = 0.0
M i n i m u m G u t t e r S i z e =
Minimum Margin Size =
Template options
Category:
System Use-Defind
2X1
Template:
Duplex Rotated
Layout:
Fit to sheet
0 . 4
0.2