Technics SD-S947 Operating Instructions Manual page 39

®
Press 4 or P to begin record-
ing, and play the source to be
recorded.
>: To begin recording from the forward
side.
4: To begin recording from the reverse
side.
Ка" nf f
ии.
шши
.2 =15 чо мм —3 0
шини
Шитіпаѓеѕ
When recording on both sides of the
tape, be sure to press the P button.
To temporarily stop recording
е REC PAUSE
Press REC PAUSE.
To resume recording
Press either 4 or P , corresponding to the side of
the tape side indicator which is lit.
Ка
пишини
- - - 0
ШИИНИН
Tape side indicator
To stop recording
Press B.
SD-S947.8747 oni
About the selection of the Dolby NR type
The Dolby NR effect can be obtained by using the same type of
Dolby NR during both recording and playback. Refer to the follow-
ing table when selecting the type (either B or C).
Use this type when the deck on which the tape will
be played back is equipped with only type B Dolby
NR.
Use this type when the deck on which the tape will
be played back is equipped with type C Dolby NR.
(for example, when this unit is also going to be
used to play back the tape.)
Erasure prevention
Remove the tab(s).
Use a screwdriver
or similar object to
break out the tab.
Tab for side "A"
Tab for side "B"
To re-record on a protected cassette
Cover the slot with adhesive tape.
Attach tape.
39