Technics SD-S947 Operating Instructions Manual page 31

To start play
== ——P—
DIE]
DISC SKIP (-, +) GROUP ENTER
(During sequential play or while it is on
[АЕ ] [c ie)
stop)
0 Press the DISC GROUPING
PLAY button of the group you
want.
For example: To hear group А
Press [ А ] .
GROUP (X) cROuP (A)
Notes
е Unnamed groups will be displayed as "GROUP А, B, С..." and so
forth. In the above example, "GROUP A" appears in the place of
"BALLADS".
* If you press the group button of a group which has no discs regis-
tered in it, the message "NO INPUT" will appear on the display. .
To cancel group play
(In the stop mode)
Press the DISC GROUPING PLAY button indi-
cated on the display.
(The group indication on the display will go out.)
For your reference
The group contents will remain stored in memory even after the unit
is switched off.
However, if the power cord is unplugged or the power supply is oth-
erwise interrupted for an extended length of time, the contents will
be erased from memory.
To cancel discs from groups
—
. Press either DISC SKIP — or + until reaching the disc you want.
2. Press GROUP ENTER.
3. Press the DISC GROUPING PLAY button(s) you want.
For example: To cancel disc No. 7 from
group A.
Press [А].
If any groups have been registered
already, their letters will light up.
Illuminated
Indication goes out.
You can cancel a disc from two or more groups at one time, provid-
ed it has been entered in each of the groups, of course.
Press Ш in step 3. (In the stop mode.)
31