Advertisement
4
To automatically calibrate your roller shutter, perform a complete
open/close cycle.
5
In case of need, possibility to launch again a new calibration
directly on the product
> 7 s
Simultaneously press the up and down
buttons for 7 s.
4
Do not press any button on the product during this calibration procedure for about 5
min.
6
The light flashes in orange
5
The light stops flashing, the
calibration is complete.
5
The manual calibration is also possible from the Home+Control
6
app.
Download Home + Control App et
follow instructions
To add this connected roller shutters switch with your connected installation, you
should follow the instructions:
- in the Legrand Home + Control application (Settings/Add a new product section)
- or consult the user manual on legrand.fr
www.legrand.fr/reference/067726A
LEGRAND - Pro and Consumer Service - BP 30076
87002 LIMOGES CEDEX FRANCE • www.legrand.com
Safety instructions
This product should be installed in compliance with installation rules, preferably by a qualified electrician. Incorrect installation
and/or incorrect use can lead to risk of electric shock or fire. Before carrying out the installation, read the instructions and take
account of the product' s specific mounting location. Do not open up, dismantle, alter or modify the device except where
specifically required to do so by the instructions. All Legrand products must be opened and repaired exclusively by personnel
trained and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights to
replacement and guarantees. Use only Legrand brand accessories.
SIMPLIFIED EU DECLARATION OF CONFORMITY
The undersigned,
Legrand
declares that the radio-electric equipment referred to in these instructions
complies with directive 2014/53/EU. The full text of the EU declaration of
conformity is available on the following website :
www.legrandoc.com
Advertisement
