Waterworks HNWS02 Installation Manuallines

INSTALLATION GUIDELINES
IMPORTANT:
Ø To ensure this product is installed properly, you must read and follow these guidelines.
Ø The owner/user of this product must keep this information for future reference.
Ø Install adequate blocking or position over a stud to properly secure the fixture.
Ø Inspect this product, upon receiving, to ensure it is the correct model and you have all parts
required for proper installation.
Ø Slab top, fittings and lavatory sold separately.
Ø This product must be installed by a professional licensed contractor. Be sure your
installation conforms to all federal, state, and local codes.
Ø Take all necessary precautions to ensure that this product is protected during installation.
Ø Ensure the floor is level and the weight of this product will be adequately supported.
Ø The use of certain plumber's putty may stain stone or tile surfaces.
UPDATED ON 08.08.2022
TECHNICAL DETAILS:
DETAIL
ADJUSTABLE LEVELERS/FEET
DIAMETER OF LEGS/TUBES
PRIMARY MATERIAL
RECOMMENDED ROUGH-IN SUPPLY HEIGHT
RECOMMENDED ROUGH-IN SUPPLY SPREAD
RECOMMENDED ROUGH-IN WASTE HEIGHT
STORAGE CAPACITY
TOP ATTACHMENT METHOD
WEIGHT
25 " [659mm]
15/16
29" [737mm]
Ø
3 1/16 " [78mm]
Ø
1 " [38mm] 27 " [469mm]
1/2 7/8
STYLE No. HNWS02
Henry Metal Round 2 Leg Washstand
29" [737mm] x 20" [508mm] x 31¾" [806mm]
SPECIFICATION
YES
1 ½ " [38mm]
Brass
21" [533mm]
9" [229mm]
19" [483mm]
28½" [724mm] x 17⅝" [448mm]
Silicone
18lbs
20" [508mm]
18 " [469mm]
1/16
PRODUCT SUPPORT | 800.927.2120 | WATERWORKS.COM