INSTALLATION GUIDELINES
IMPORTANT:
To ensure this product is installed properly, you must read and
follow these guidelines.
The owner/user of this product must keep this information for
future reference.
This product must be installed by a professional licensed
contractor.
Be sure your installation conforms to federal state, and local
codes. In the State of Massachusetts, all installations must comply
with the rules and regulations set forth within 248 CMR.
Inspect this product to ensure you have all the parts required for
proper installation. Product is sold partially assembled but shown
fully disassembled for illustrative and service purposed only.
Use only a strap wrench or protected/smooth-jaw wrench on any
finished surface.
The use of certain plumber's putty may stain stone or tile surfaces.
If further assistance is required, please contact Product Support at
1-800-927-2120 Monday through Friday, 8am – 6pm EST.
Refer to the separate Service Parts Documents for available
replacement parts.
PRODUCT SUPPORT | 800.927.2120 | WATERWORKS.COM
TECHNICAL DETAILS:
DETAIL
ADJUSTABLE VERSUS FIXED SPRAY
HANDLE TURN ANGLE
INLET CONNECTION
RESTRICTED MAXIMUM FLOW RATE
SPOUT REACH
SPOUT SWIVEL
SPRAY HOSE LENGTH
SPRAY INCLUDED IN UNIT
WATER PRESSURE RANGE
WATER PRESSURE RECOMMENDED
†
UK Style No., CE30KM is supplied with 2 BSPP adapters, assembly required.
MOUNTING
SURFACE
STYLE No. CEKM30, CE30KM
Canteen One Hole High Profile Kitchen Faucet
with Pull-Out Spray and Oak Lever Handle
SPECIFICATION
ADJUSTABLE
QUARTER TURN
3/8" COMPRESSION CONNECTOR HOSES †
2.2gpm [8.3L/min]
9-1/8" [231mm]
YES
49" [1.2m]
YES
20psi [1.5 bar] MIN
85psi [6.0 bar] MAX
45psi [3.0 bar]
Ø 2-1/8"
[54mm]
FITTINGS
1/4" MIN
[6mm]
2-1/4" MAX
[57mm]
DECK
THICKNESS
PAGE 1 OF 6 | UPDATED ON 5.11.2018
HOLE