Waterworks RHWS01 Installation Manuallines

INSTALLATION GUIDELINES
WARNING
 This product is extremely heavy. It is
2 or more persons install this product.
IMPORTANT
 To ensure this product is installed properly, you must read and follow
these guidelines.
 The owner/user of this product must keep this information for
reference.
 This product must be installed by a professional licensed contractor.
 Be sure your installation conforms to federal, state, and local codes.
In the State of Massachusetts, all installations must comply with the
rules and regulations set forth within 248 CMR.
 Inspect this product to ensure you have all the parts required for
proper installation. Product is sold partially assembled but shown
fully disassembled for illustrative and service purposes only.
 The use of certain plumber's putty may stain stone or tile surfaces.
 Take all necessary precautions to ensure that this washstand is
protected during installation.
 Ensure that the floor is level and that there is proper floor support to
accommodate this heavy washstand.
 Proper blocking is suggested to attach the washstand to the wall.
 If further assistance is required, please contact Product Support at
1-800-927-2120 Monday through Friday, 8am – 6pm EST.
PRODUCT SUPPORT | 800.927.2120 | WATERWORKS.COM
recommended that
STRONGLY
TECHNICAL DETAILS
DETAIL
WEIGHT
ROUGH-IN SUPPLY HEIGHT RECOMENDED
ROUGH-IN WASTE HEIGHT RECOMENDED
ROUGH-IN
 An optional 2" x 6" blocking can be used to secure the WASHSTAND to the wall.
STYLE No. RHWS01
Rhea Marble Two Leg Single Washstand
with Top and Sink 42" x 24" x 35"
SPECIFICATION
600 lbs [272 kg]
21" [533 mm]
19" [483 mm]
PAGE 1 OF 3 | UPDATED ON 5.05.2020