Advertisement
Subject to change
Door
Delivery condition
1.
Installation
1.
2.
3.
4.
5.
Roto Safe C
Day-time unlocking Tandeo
Remove the cover cap.
Unlock the lock.
Press the handle downwards until the hole location
for the changeover switch installation will be
released.
Hold down the handle. Clip in the changeover switch
rotated to the left approx. 25°.
Turn the changeover switch to vertical position.
NOTE!
Make sure that the switch is in night position
(vertical rib).
Release the handle.
IMO_420_EN_v1
.
.
June 2016
1 / 2
Advertisement
Table of Contents
Related Manuals for Roto Safe C Tandeo
Summary of Contents for Roto Safe C Tandeo
- Page 1 25°. Turn the changeover switch to vertical position. NOTE! Make sure that the switch is in night position (vertical rib). Release the handle. Subject to change Door Roto Safe C Day-time unlocking Tandeo IMO_420_EN_v1 June 2016 1 / 2...
- Page 2 The additional locks run out. Now the door can only be opened by pressing the handle or with the key. (Set the E-opener in the frame component to night operation mode (see detail illustration)). Roto Frank AG Window and Door Technology Wilhelm-Frank-Platz 1 70771 Leinfelden-Echterdingen...
Need help?
Do you have a question about the Safe C Tandeo and is the answer not in the manual?
Questions and answers