GEOMATE SG7 User Manual page 61

2. TCP/UDP_Client/NTRIP Server
Tap the Connect button on the right of required TCP/UDP Client → the IO Settings screen will
appear → select the connection protocol from TCP, UDP,NTRIP1.0 and NTRIP2.0 → enter the
IP and Port of the target server → configure messages that you want to output to the target
server → click
➢ Connection Protocol: TCP
➢ Connection Protocol: UDP
GEOMATE SG7 GNSS USER GUIDE
to save and complete the connection.
| 2022-07
Equipment Setup and Operation
P a g e | 61