Table of Contents
Advertisement
For Reference Station Mode, there are three modes available:
4.3.3.1
Auto Rover: The receiver will serve as a rover after this mode is enabled, and
then receive correction data through the working mode set last time.
4.3.3.2
Auto Base: The receiver will serve as a base after this mode is enabled, and
then broadcast correction data based on coordinate inputted by user or
obtained through autonomous positioning automatically.
GEOMATE SG7 GNSS USER GUIDE
| 2022-07
Equipment Setup and Operation
P a g e | 49
Advertisement
Table of Contents
Need help?
Do you have a question about the SG7 and is the answer not in the manual?
Questions and answers