Problem Solving - Nutrea DoubleFlow Instruction Manual

7
Pump positions
Ideal
Good
Slightly bent over
May leak
Sit back
Upright
Fine
Bent over
Does not work
back or side position

Problem solving

There is no suction or very little suction
Check if the breast shield and the bottle are properly connected to each
other. Press firmly on the edge everywhere.
Check if the valve of the breast shield is properly connected to the bottle.
Ensure that the control module, silicone diaphragm, and bottle are aligned
and properly connected to each other.
Check the components for any damage or wear and replace if necessary.
If you experience pain while pumping, contact your lactation consultant
or nurse immediately.
Sit upright during pumping. Do not lean forward or lie on your side. Refer to
the breast pump positions in the previous chapter for more information.
8