Assembling The Breast Pump; Explanation Of The Buttons - Nutrea DoubleFlow Instruction Manual

Assembling the breast pump

3
Thoroughly wash your hands before starting the assembly of the pump.
Ensure that all washable parts have been disinfected before use, as
described in this manual. And make sure that all parts are dry before
assembling them.
STEP 1
Place the silicone diaphragm
on the bottle and press firmly.
When the breast shield and bottle are properly connected, there is a
small opening at the top through which you can pour the milk.
STEP 3
Attach the control module
to the bottle and press the
control module firmly.
STEP 2
Insert the breast shield into the
bottle. Ensure that the valve at
the back of the bottle is securely
in place before connecting the
rim of the breast shield to the
bottle.
STEP 4
The assembly is complete and
the breast pump is ready for
use.

Explanation of the buttons

Power button Massage mode
Battery percentage Suction power display
Adjust suction power 2-in-1 mode
Pumping mode
Time indication
4
Mode button
Speed display
Adjust speed