How To Use The Breast Pump - Nutrea DoubleFlow Instruction Manual

How to use the breast pump?

5
Instructions before use:
Make sure all washable parts of the breast pump are disinfected and
assembled according to the instructions in this manual. Wash your hands
before use and briefly massage the breast. Then sit upright and align the
center of the silicone breast shield with your nipple. Press the breast shield
firmly against the breast to create a good vacuum.
Power On/Off button
Press this button to activate the control module. The control module
will automatically turn off after 30 minutes.
Adjusting suction intensity
With these two buttons on the right side of the display, you can adjust
the intensity of the suction. Each mode has 9 settings for suction
intensity. You can customize the intensity that feels most comfortable
and efficient for you. The intensity is indicated in the middle of the
display with a number from 1 to 9.
Mode button
There are three different operating modes: massage mode, pump
mode, and 2-in-1 mode. When activating the control module, the
default working mode is intensity 1 of the massage mode. Press the
button to switch to the pump mode and then to the 2-in-1 mode. The
massage mode is a faster pumping rhythm to stimulate letdown. The
pump mode is a long and deep pumping rhythm to simulate a baby's
feeding. The 2-in-1 mode consists of two short and one deep pumping
rhythm. This mode is used when the breast is almost empty, especially
when the milk flow is slow.
Adjusting speed
With these two buttons on the left side of the display, you can adjust
the speed or interval of the pumping rhythm. The speed can only be
adjusted in the pump mode and the 2-in-1 mode. The pump mode has
9 different speeds, and the 2-in-1 mode has 7 different speeds. The
speed is indicated by numbers on the display under 'Speed' . You can set
the speed that feels most comfortable and efficient for you.
Placement in the bra
Turn off the pump before removing it from the breast.
6