GODIAG CAS2 CAS3 SER User Manual

Semi smart test platform

Advertisement

GODIAG CAS2 CAS3 SER
Semi Smart Test Platform
User Manual
2024 V1.1

Product overview

1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CAS2 CAS3 SER and is the answer not in the manual?

Questions and answers

Summary of Contents for GODIAG CAS2 CAS3 SER

  • Page 1 GODIAG CAS2 CAS3 SER Semi Smart Test Platform User Manual 2024 V1.1 Product overview...
  • Page 2 Godiag CAS2 CAS3 SER Semi Smart Test Platform is a dedicated device developed for BMW locksmiths, maintenance engineers and CAS2 / CAS3,CAS3+ CAS3++ programming engineers. This product is suitable for magnetic semi-intelligent or smart keys. Note: This platform does not support mechanical key CAS2.
  • Page 3 (1) Check the start switch. (2) IMMO synchronization detection indicator light. (3) CAS module key induction coil indicator light. (4) Power indicator light. (5) Key identification port. (6) CAS module 41PIN connector. (7) CAS module 14PIN connector. (8) Analog start-stop switch. (9)Start/stop button light.
  • Page 4 A. Module and key synchronization detection: Check whether the CAS2 / CAS3, CAS3+ CAS3++ module and the magnetic semi-intelligent smart key can be synchronized: Step 1: Connect the CAS2/CAS3, CAS3+ CAS3++ modules according to the connection diagram. Step 2: Put the key into the key sensing area. Step 3: Connect the power supply and the corresponding power indicator light will light up.
  • Page 5 The following uses Xhorse vvdi2 device to perform BMW CAS2/CAS3, CAS3+ CAS3++ semi-intelligent/smart key programming and matching operations: 1. Connect the CAS2/CAS3, CAS3+ CAS3++ module and the key programming diagnostic device according to the connection diagram. 2 Select “key learn—CAS Key Learn---Connect”. 3.
  • Page 6 4. Select an unused key position, be sure to select the “prepare dealer key with programmer” menu, and use the VVDI2 key programmer to generate the key. If the key is placed in the GODIAG CAS2 CAS3 SER Semi Smart Test Platform key sensing area, the dealer key will not be generated.
  • Page 7 5. After programming the dealer key, put the key into the Godiag CAS2 CAS3 SER Semi Smart Test Platform induction port for testing. For test steps, please refer to “Synchronous Detection of Module and Key”. If the IMMO light cannot light up, enter the VVDI2 menu “Key Learn—CAS/EWS Information—Connect—Synch DME-CAS or Synch CAS-ELV”.
  • Page 8 Shenzhen Sinoy Technology Co.,Ltd All Rights Reserved www.godiag.com +86 18813687743 Sales@GoDiag.com Thanks for reading!

This manual is also suitable for:

Sk421

Table of Contents