Advertisement
EN
Safety Instructions
When transporting or storing the product, be sure that it is level: do not tilt it at an angle or
place it upside down.
Ink could leak.
When removing jammed paper, do not forcibly pull out the paper or the paper cassette. Also,
do not perform this procedure with an unstable posture.
The momentum of pulling out the paper or paper cassette suddenly could result in injury.
Store the cutter in a location out of the reach of children.
The cutter's blade could cause an injury. Pay careful attention when replacing the cutter.
When opening and closing the roll paper cover, keep your hands away from the joint (seam)
between the cover and the main unit.
Failure to observe this precaution could result in injury.
When connecting cables or optional accessories, make sure they are installed in the correct
direction and that you follow the procedures exactly.
A fire or an injury could occur. Install them correctly by following the instructions in the manual.
When moving the product, make sure it is turned off, the power cable is unplugged from the
outlet, and all connecting cables have been removed.
If cables are damaged, an electric shock or fire could occur.
Notes on the Power Supply
Make sure the blades on the plug are inserted completely into the power outlet.
An electric shock or fire could occur.
Unplug the plug regularly and clean between the blades and around the base of the blades.
If the plug is plugged in for an extended period of time, dust collects around the base of the blades
and a short circuit or fire could occur.
When unplugging the plug, grip the plug itself; do not pull the power cable.
If the cable is damaged or the plug is deformed, an electric shock or fire could occur.
Do not insert or unplug the plug with wet hands.
An electric shock could occur.
Do not use the plug if any foreign objects such as dust have adhered to the plug.
An electric shock or fire could occur.
Use only the type of power source indicated on the printer's label.
An electric shock or fire could occur.
To prevent electric shock, connect the printer to a grounded outlet.
Connecting the printer to an outlet that is not grounded could result in fire or electric shock.
6
!
Caution
!
Warning
Do not use any other power cables except for the cable supplied with the printer. Also, do not
use the power cable supplied with the printer for any other devices.
An electric shock or fire could occur.
Do not use the power cable if it is damaged.
An electric shock or fire could occur. If the power cable is damaged, contact Epson Support. Note
the following points to avoid damaging the power cable.
❏ Do not modify the power cable.
❏ Do not place anything heavy on the power cable.
❏ Do not bend, twist, or pull forcefully on the power cable.
❏ Do not route the power cable near heaters.
Do not connect the power cable to a power strip or multi plug.
An electric shock or fire could occur. Connect the power cable directly to an outlet for domestic
use.
If you are not going to use the printer for an extended period, unplug the printer for safety
reasons.
Notes on Consumables
Do not shake the ink cartridges too hard.
Ink may leak from the cartridge if you shake it too hard.
Do not disassemble the ink cartridges or the maintenance box.
If it is disassembled, ink could get in your eyes or adhere to your skin.
If ink contacts your skin or enters your eyes or mouth, immediately take the following actions.
❏ If ink adheres to your skin, immediately wash it off using soap and water.
❏ If ink enters your eyes, rinse immediately with water. Failure to observe this precaution
could result in bloodshot eyes or mild inflammation. If problems persist, consult a physician
immediately.
❏ If ink enters your mouth, consult a physician immediately.
Store the ink cartridges and the maintenance box in a location out of reach of children.
Notes on Paper
Do not rub the edges of the printing paper with your hand.
The edges of the paper are thin and sharp and could cause an injury.
!
Warning
!
Caution
!
Caution
!
Caution
Advertisement
