Table of Contents
Advertisement
Paper-pick Rollers Ð
1
Turn off the printer.
6
Phaser 200 Series
Clean every transfer roll change.
2
Remove the paper tray.
Remove the paper or
transparencies from the tray.
If your printer has two paper
trays, be sure to remove both
trays.
When removing paper or
transparencies, do not push
the paper trayÕs metal plate
down. If the metal plate is
down, put the paper tray in
the printer and pull it out
again; this returns the metal
plate to the up position.
3
For A4-size (metric) trays
b
a
Remove the cleaning tray
from your cleaning kit.
Note
If you are using an A-size
(U.S.) paper tray: do not
break the endtabs off the
cleaning tray. Proceed to
S tep 4 on the following page.
If you are using an A4-size
( metric ) paper tray: break
both endtabs ( a and b ) off
the cleaning tray.
Advertisement
Table of Contents
