Tektronix Phaser 200E Supplementary Manual page 7

Upgrading a Phaser¨ 200e, 200i or 220e printer to a Phaser¨ 240
4. Connect the I/O boardÕs ribbon cable to the image processor boardÕs
I/O connector. Tilt the I/O board forward into place against the rear
of the printerÕs card cage. Secure the I/O board in place with the two
thumbscrews.
Install
I/O board
Install
ribbon cable
5.
Reconnect the interface cables. Turn on the printer and examine the
startup page it should automatically print out. Refer to the Phaser 240
Color Printer User Manual for details on connecting interface cables and
making prints.
7
31865-06