Advertisement
CHARGING THE BATTERY PACK
ẸBE
(Battery and Charger are not included in the kit. ZEHTEEHRRER)
a. Once the battery is ready to be charged, first plug the AC quick-charger into the AC power source outlet, and then connect the
battery input/output hamess to the charger.
b. Always monitor the battery during charging. As soon as the battery is fully charged, disconnect the battery from the charger plug
(over-charging or charging incorrectly using inadequate chargers may cause the battery pack to become dangerously hot).
c. Ensure the battery pack is completely discharged prior to charging. Discharge the battery pack by either running the electric motor
until it slows down or use a discharger (not included).
d. For best results, let the battery pack cool before charging. Heat may prevent the battery pack from charging to full capacity and also
decreases the performance of the battery.
a te.
SSG 76988 HAAN A
BEE
HANG
ue
«
b. FALE EEN
LITERS
MORE RHAH
©
(Her LAG
TCG
UALR
AMA
AEEA
» ABLZEDSLLFER ° )
c. FEMA
RIED
EC,
(AANA TEL , EEE NIRA
ERBE NS EIER)
d 8951827683 ,
C A E
RIA
HINE: FATTER
TEINE:
LUE RAR ROR ARH
+
a. Remove the body pins (4pcs.) and detach the body.
b. Straighten antenna with a screwdriver so it is eaiser to insert into antenna tube.
c. Put the antenna wire through the antenna pipe. (Do not cut or shorten antenna wire.!) Push the antenna pipe into the chassis mount
hole,
a. GARAGE
(AMM) HARTER
b. RUFHOR EECH
©. HERHRBERNZZBERSENREIRESL.E (1879398 » Deenen
-
Advertisement
