Advertisement
Quick Links
Advertisement
Related Manuals for Waterfall Audio FLEX200
Summary of Contents for Waterfall Audio FLEX200
- Page 1 M A D E I N F R A N C E USER’S MANUAL SUBWOOFER FLEX200...
- Page 2 CONSEILS DE MONTAGE REVIEW THIS INSTRUCTION MANUAL BEFORE ASSEMBLY AND KEEP THEM FOR FUTURE REFERENCE. BEFORE ANY DRILLING OPERATION, ALWAYS MAKE SURE TO CONSULT THE PLANS OF THE ROOM. TO ENSURE THAT THERE IS NO PIPE, ELECTRICAL CONDUIT OR ANY SPECIFIC INSTALLATION BEHIND THE WALL.
-
Page 3: Optional Accessories
Silicone Screwdriver drill M4 key Bubble level CONTENT OF THE BASIC PACK T x 1 Radiator x 1 S250 x 1 FLEX200 x 1 D180 Disc Screw BA13 CHC M4 25 x 14 OPTIONAL ACCESSORIES Optional frame 12mm Optional frame 19mm... -
Page 4: Mounting Options
MOUNTING OPTIONS FLEX200 12mm FLEX200 19mm POSSIBLE THICKNESSES 12,00 24,00 38,00 18,00 31,00 FLEX13 FLEX18 FLEX25 FLEX30 FLEX40 - 2 -... - Page 5 PACKAGING Cover and «T» hanging plate Box of Sub Flex200 Cardboard of S250 amp Cardboard of loudspeaker D180 - 3 -...
- Page 6 STEP 1 Position the subwoofer on a flat surface. STEP 2 Apply silicon glue into the five grooves (silicon glue not supplied) 50mm STEP 3 Position gypsum board 600mm. - 4 -...
- Page 7 STEP 4 Final assembly with 12 screws (screws supplied) STEP 5 Apply silicon glue into the groove (silicon glue not supplied) INFORMATION 200mm minimum height - 5 -...
- Page 8 STEP 6 1. Pull out power supply & modulation cable 2. Insert the sub into the wall STEP 7 Fix the bottom with 4 screws (screws supplied) STEP 8 Fix each side with 3 screws (screws supplied) - 6 -...
- Page 9 STEP 9 Apply silicon glue on the surface (silicon glue not supplied) STEP 10 Fix each side with 2 screws (screws supplied) STEP 11 Position panel to close the wall - 7 -...
- Page 10 STEP 12 Finishing of wall INFORMATION Painting or finish must not go belowthisline Note : for separate amp, see page 12 STEP 13 1. Connect woofer cable to the amp (check polarities) 2. Pull out woofer cable 3. Fix the amp with 10 screws (screws supplied) - 8 -...
- Page 11 STEP 14 Connect the woofer (7’’ AtohmD180) STEP 15 Fix the woofer with 4 screws (screws supplied) STEP 16 1. Connect the mains & modulation cable 2. For setting, see instruction’s manual - 9 -...
- Page 12 STEP 17 Position «T» hanging plate & screw (screw supplied) STEP 18 Adjust level & lock in tightly with two screws (screws supplied) STEP 19 Position the coveron the «T» hanging plate - 10 -...
- Page 13 STEP 20 1. Slide the cover 2. Secure it with the bottom screw (screw supplied) VISUALISATION PRODUIT FINI - 11 -...
- Page 14 SEPARATE AMP STEP 1 1. Check that the plate with the terminal is in place 2. Pull out woofer cable STEP 2 1. Connect the woofer (7’’ AtohmD180) 2. Fix the woofer with 4 screws (screws supplied) STEP 3 1. Connect the sub to the separate amp 2.
- Page 15 IN-FURNITURE OPTION 1 IN-FURNITURE OPTION 2 IN-FURNITURE OPTION 3 - 13 -...
- Page 16 UNDER SOFA ON WALL - 14 -...
-
Page 17: Warranty
CLEANING To clean your speakers you can use a window cleaner (Ajax window cleaner is ideal) with a soft, lint-free cloth. Never use abrasive products: jex pad, sandpaper, etc. WARRANTY Waterfall speakers have a 5 years warranty (parts & service) except amplifiers. - Page 18 WATERFALL AUDIO ZA les praderies - 83 570 Carcès - France waterfallaudio.com Made in France, 5 years warranty on speakers, 2 years warranty on amplifiers (parts& service). We operate a policy of continuous improvement and reserve the right to amend designs and specifications without prior notice.
Need help?
Do you have a question about the FLEX200 and is the answer not in the manual?
Questions and answers