Advertisement
Technical Support and E-Warranty Certificate www.vevor.com/support
PORTABLE LIFTS
MODEL: JT-5000 / JT-7000
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
Advertisement
Table of Contents
Need help?
Do you have a question about the JT-5000 and is the answer not in the manual?
Questions and answers
So If AW46 is used what will happen to system and if nothing happens should it be drained and replaced iso46
The manual specifies using ISO46 hydraulic oil for the VEVOR JT-5000. If AW46 oil, which is a different formulation, is used, it may cause improper system performance or potential damage due to incompatibility. Therefore, yes, AW46 oil should be drained and replaced with ISO46 oil.
This answer is automatically generated
It 5000 is dead ,will not do anything. It has power but pump will not work. I used it once, the stored it for about a month. Hooked it ,plugged it in and nothing. What **** I missing?
If the VEVOR JT-5000 has power but the pump will not work, possible issues include:
1. Hydraulic Oil Pollution – Replace it with the specified hydraulic oil.
2. Remote Control Not in Locked Position – Ensure the easy lift jack is in the locked position; otherwise, hydraulic oil may leak slowly, lowering the frame.
3. Gas Pump Cannot Maintain Pressure – Check the system using standard valve tools and avoid tightening the spool too much.
4. Hydraulic System Pressure Buildup – Hold down the drop button on the remote control for a few seconds after the frame reaches the ground to return as much hydraulic fluid as possible to the tank.
5. Fast Connections Getting Harder – If pressure buildup prevents quick connection, contact the dealer for further assistance.
This answer is automatically generated
Can Aw46 hydraulic oil be used instead of iso 46 hydraulic oil
No, the manual specifically states to use ISO 46 hydraulic oil. AW46 is not mentioned, so it should not be used as a substitute.
This answer is automatically generated