Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Hydroflow C Series
Summary of Contents for Hydroflow C Series
- Page 1 RANGE HYDROPATH Technology | The home of...
- Page 3 Input Voltage 87-240V AC (100 -230 VAC Nominal) Input Frequency 47-63 Hz (50-60 Hz Nominal) Material Specifications Main unit: Anodised Aluminium End plates: UL V-0 rated polycarbonate Water and Dust Protection IP Rating: IP68 IEC 60529 (Transducer unit) IP66 IEC 60529 (Junction box) Built-in EMI Filter Meets: FCC 20780 Class B...
-
Page 4: Junction Box
Electrical Junction box User mains Conditioner and BMS connection unit Fuse holder User mains and BMS Connection connection to unit Inner grommet allows for connection to different cable Junction box diameters BMS Relay Signal Wires S/W Remote Monitoring Facility A volt-free normally-open contact closure is provided by the unit connection with a BMS (Business Management System) computer, to monitor that the unit is operating correctly. - Page 5 FLOW The Hydro C Range water conditioner is specifically designed to combat limescale in commercial and/or industrial applications by clustering mineral ions. C Range units are most commonly used on heat exchangers and plumbing systems. Total Model Ferrite Dimensions Ferrites Weight kg (DN) Arrangement...
- Page 6 FLOW The Hydro C Range water conditioner is specifically designed to combat limescale in commercial and/or industrial applications by clustering mineral ions. C Range units are most commonly used on heat exchangers and plumbing systems. Total Model Dimensions Ferrite Arrangement Ferrites Weight kg (DN)
- Page 7 DO NOT POWER UP UNIT UNTIL ALL FERRITES SUPPLIED ARE CONNECTED. POWERING THE UNITS WITHOUT FERRITES WILL INVALIDATE THE WARRANTY • The unit is supplied with a bracket for Unit support bracket ease of mounting to the pipe. The two upper plates should be loosely secured with bolts before installation.
- Page 8 DO NOT POWER UP UNIT UNTIL ALL FERRITES SUPPLIED ARE CONNECTED. POWERING THE UNITS WITHOUT FERRITES WILL INVALIDATE THE WARRANTY Plate • Place the unit on the bracket and hold in place using the swinging plates. • Secure by tightening the four steel nuts. Plate Hexagon Nuts •...
- Page 9 DO NOT POWER UP UNIT UNTIL ALL FERRITES SUPPLIED ARE CONNECTED. POWERING THE UNITS WITHOUT FERRITES WILL INVALIDATE THE WARRANTY Thumb screw • Assemble all the other ferrites around the pipe according mechanical configuration specified for the unit. • Loosely secure each ferrite with plastic thumb screws and thumb nuts.
- Page 10 FLOW Hydro protects against limescale by causing the scale-forming ions to form clusters. When the water is heated, crystals form in suspension rather than as hard scale on surfaces. FLOW •Fit Hydro on the cold water supply to wherever the water is heated. •Consider signal propagation barriers.
-
Page 14: Box Contents
Box Contents Transducer Unit Instructions Model Long Short Plastic Plastic Plastic Steel Steel Pipe 50mm Steel ferrites Ferrites Thumb Thumb Bracket Bands clamps bolts locking Nuts Screws Nuts nuts C100 C125 C150 C175 To register the product please visit hydropath.com/product-registration/ Products must be registered to activate any warrantee or guarantee.
Need help?
Do you have a question about the C Series and is the answer not in the manual?
Questions and answers