INSTALLATION 1. Hydro FLOW devices can be installed either horizontally or vertically. 2. Loosely attach the cable ties to the pipe.(B) 3. Secure the lower half of the unit to the pipe by tightening the cable ties around each tab and cut off the excess. Insert the DC power supply plug into the top half of the unit.(D) 5.
SPECIFICATIONS As with all electrical products, ensure the equipment is connected in accordance with current electrical regulations in your area. Hydro FLOW water conditioners are intended for non-chemical treatment of water and do not contain any serviceable parts. Do not expose the water conditioner and power supply to moisture and use only with provided power supply.
TROUBLESHOOTING The LED indicates the unit is properly transmitting the Hydropath signal. If the LED is not illuminated, check the following: • Ensure the bottom half of the unit is properly connected and aligned. • Verify the DC power supply plug is inserted into the unit's upper half.
Page 10
ARISING BY PREVIOUS COURSE OF DEALING OR USAGE OF TRADE), INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. HYDROFLOW MAKES NO GUARANTEE OF PERFORMANCE OTHER THAN AS SET FORTH ABOVE. NO AGENT, REPRESENTATIVE, OR EMPLOYEE OF HYDROFLOW IS AUTHORIZED TO MAKE ANY WARRANTIES OR GUARANTEES WITH RESPECT TO ITS PRODUCTS.
Page 12
FOR ADDITIONAL INFORMATION SCAN THE QR CODE OR GO TO WWW.HYDROFLOW-USA.COM hydroflow-usa hydroflowusa +1-425-497-3900 sales@hydroflow-usa.com @hydroflowusa www.hydroflow-usa.com @hydroflow-usa...
Need help?
Do you have a question about the PEARL and is the answer not in the manual?
Questions and answers