Advertisement
SPINDLE
TONEARM
SPEED
SELECTOR
LEVER
HEADPHONE
JACK
SPEED
CONTROL
LEVER
COMMAND
CONTROL.
LEVER
Fig. 17
_ AUTOMATIC MULTIPLE PLAY
The C-6000A can continuously play one sides of up to 8 records of the
same size (33, 45 or 78 rpm).
1. Set the automatic multiple play spindle in the turntable platter.
2. Place the desired number (up to 8) of records of the same size on
the spindle.
3. Set the speed selector lever to the rpm of the records to be played
(33, 45 or 78 rpm)
4. Release the arm lock by hand.
5. Move the command control lever to "Start''.
6.
Then, automatic multiple play of records will start; the spindle lets
(
the first record drop on the turntable, the turntable starts rotation. The
tonearm
raises off the arm
rest, moves
over the record
and then set
down
on the cuing point of the record. Upon finishing the last record,
the tonearm will automatically moves back onto the arm rest, and the
turntable stops revolving.
7. Should the stylus point not set down correctly on the cuing point of
the record, adjust the lowering position of the tonearm
by turning the
screw
provided
in the mounting
board
using
the screwdriver.
(The
lowering
position of the tonearm
is adjusted to the record size before
shipped.)
Notet
When you wish to reject a certain record during a multiple play
Operation,
move
the command
control
lever to "Start'' at the
very moment
the stylus is about to touch that particular record.
Then
the tonearm
will move
back onto
the arm
rest, and the
following record will drop for play.
FULLY AUTOMATIC SINGLE PLAY
For fully automatic single play, take the following steps.
1. Set the single play spindle in the turntable platter.
2. Place a record on the turntable platter.
3. Set the speed selector lever to the rom of the record.
4. Move the command control lever to ''Start''.
Then, an automatic single play will start. After the record has finished
playing, the tonearm
will automatically
return to the arm
rest and the
turntable stops revolving.
:
Advertisement
