Table of Contents
Advertisement
4.2.8 MENU SYSTEM – MAIN SERVICE MENU
4.2.8.1 SERVICE MENU TIMEOUT
The service menus remain unlocked for a programmed timeout period (set to 5 minutes). Within
that period, the service menus can be re-enabled by long-pressing the
timeout period is allowed to expire, the password entry screen (see section 4.2.7) will appear prior
to accessing the service menus. Also, if the service menu is active when a timeout occurs, the
service mode is disabled, and the display will go blank (i.e. power saving mode). Lastly, the
service menu timeout is reset with each button press while the service menus are active.
4.2.8.2 MENU SYSTEM – SERVICE MENU OVERVIEW
Once the correct password is entered, the main service menu is displayed as shown in the
following diagram.
Once again, the
UP
and
main service menu provides menu items listed in
Menu Item
<Sensor #> : <Gas Label>
UTx
Exit
To exit the Service Menu,
as shown below.
____________________________________________________________________________________
AMC-1BZ Gas Monitor
DOWN
buttons can be used to navigate the list of service menus. The
Table 4-2: Service Menu Options
Description
Each sensor is included in the service menu
indicated by its number and gas label (Ex: S2 : CO)
Access the settings for the transmitter module
through the 'UTx' menu item
Select this menu item to exit the service menu
press
DOWN
repeatedly until the end is reach and Exit is highlighted
24
Table 4-2
:
ENTER
button. If the
Advertisement
Table of Contents
