Setting Up The Fiery Exp8000/50 On Mac Os X - EFI DocuColor 5000 Printing Manual

S
ETTING

Setting up the Fiery EXP8000/50 on Mac OS X

After you install the printer driver files on Mac OS X, you must set up the Fiery EXP8000/50
in the Printer Setup Utility (or Print Center). This section describes how to set up the Fiery
EXP8000/50.
You must also configure the Fiery EXP8000/50 for the options installed on the digital press to
allow the Fiery EXP8000/50 to take advantage of the digital press options. Configure the
options manually, or for TCP/IP network connections, use the Two-Way Communication
feature to configure the options automatically.
Installable option
Feeder
Finishing Device Setup
GA Package
N : For more information about the print settings that use these options, see
OTE
T F
O SET UP THE IERY
1 Choose Applications from the Go menu, open the Utilities folder, and start Printer Setup
Utility (or Print Center).
The Printer List dialog box appears.
2 Click Add.
3 Choose AppleTalk or IP printing from the menu that appears.
U P M OS X
P RINTING ON AC
Selections
Not Installed, SFM
Not Installed, CSS, HCS Bypass, HCS, HCS - HCS Bypass,
HCS-CSS, HCS - HCS, HCS - HCSS, HCSS
Not Installed, Fiery Graphic Arts Package, Fiery Graphic Arts
Package, Premium Edition
EXP8000/50 P
IN THE RINTER
S U ( P C
ETUP TILITY OR RINT
10
Print Options.
)
ENTER