Setup Wireless - R-Go Split Break Manual

Setup Wireless

A Turn the keyboard on. At the back of the keyboard you
will find the on/off switch.
Channel 1,2 and 3
Ch. 1 Ch. 2
Ch. 3
Fn
B To connect the keyboard you can choose channel 1, 2 or
3. If you press once the chosen channel, you can change
devices. Press and hold the
your chosen channel. It will search for a device to connect
with. Hold until the light indicator on the upper right side
turns on.
C Open ''Settings'' on the device. Set up the connection.
D To charge the keyboard, connect the keyboard to your
computer using cable
8
Fn-key
.
01
and press the key of