Table of Contents
Advertisement
SAFETY NOTES
※Installation example of wrist-strap.
Please connect the clip to the metal part of the chassis of the TV with
the wristband grounded. Below is a grounding example of each model.
＜K*-65Z9F＞
※Caution : ESD wrist-strap to be checked daily.
Use Multi-meter to make sure resistance of ESD wrist-strap is OK.
(R=750K Ohms to 35Mega Ohms)
When holding board, do not hit or touch to Plastic part(s)
3
After take defective board out from TV, put it into ESD bag.
4
Do not place on floor mat/carpet direct. And, always put it on ESD cushion
1-4. Caution About the Lithium Battery.
1) Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
2) Outer case broken battery should not contact to water.
9
SYS SET
Advertisement
Table of Contents
