Table of Contents
Advertisement
GRIND CHART
The weight output is based on setting the Dose Control to 2 cups. Note: This chart is a guide
only. Bean variety, roast type and moisture content will all affect weight.
Grind size
1
5
10
Weight
15
16
17
output (g)
GRINDING FOR ESPRESSO COFFEE
The Portafilter Cradle is designed to fit portafilters that use 52mm baskets. If you have a larger
portafilter, grind into the Grind Container, then use the Scoop to measure the coffee into your
portafilter. Alternatively, hold your portafilter under the Grind Outlet without the Cradle.
2
1
DOUBLE BAYONET MOUNT
TRIPLE BAYONET MOUNT
To check whether your
With the appliance
portafilter will fit the
unplugged, remove the
Portafilter Cradle, measure
Grind Container. Slide
the outer diameter of your
the Portafilter Cradle, as
portafilter, as shown.
illustrated, under the Grind
A size of between 59mm
Outlet. Plug in the appliance
and 62mm should be
and select a fine grind setting,
compatible.
see page 13 for Quick Start
Grind Settings for guide.
15
20
25
30
35
20
23
26
29
30
3
When using the Portafilter
Cradle the the Dose Control
should be set to 2. For
accurate dosing and less
waste, weigh the amount of
beans you need, add to the
Bean Hopper, then grind
through before tamping to
the right level. As a guide,
we recommend 7 - 10g for
a single espresso and 14-20g
for a double.
Alternatively, refer to your
coffee machine's instruction
manual for guidance.
10
CLEANING
Follow these steps at the end of each use before storing the appliance, or before changing
coffee beans to avoid flavour tainting. WARNING: Burrs will have sharp edges. Take care
when cleaning. Risk of injury to persons.
2
1
Unplug machine and allow
Remove the Grind Container
to cool. Rotate the Bean
and empty out any remaining
Hopper anti-clockwise until
coffee. Wash the Grind
the arrow meets the unlock
Container, Container Lid
symbol on the Main Body.
and Bean Hopper in warm,
Remove the Bean Hopper
soapy water. Rinse, then dry
and empty out any beans
thoroughly before storing.
into an airtight container to
store.
5
4
Use the Cleaning Brush to
Use the Cleaning Brush to
brush away coffee grounds
remove any build-up of debris
from the Lower Burr.
in the Grind Outlet. A torch
is useful to check that the
Grind Outlet is clean of loose
coffee and oil build-up from
the beans. If required, use a
soft, dry cloth to wipe away
stubborn debris. Caution: Do
not use sharp implements.
Risk of damage.
3
Lift out the Upper Burr and
use the Cleaning Brush to
remove any coffee. Note:
Do not immerse the Upper
Burr in water. Remove
stubborn coffee build-up
with a damp cloth and dry
thoroughly.
6
BIN
With the appliance
unplugged and the Bean
Hopper, Upper Burr, Grind
Container/Portafilter Cradle
removed, tip the Main Body
over a bin. This will remove
any remaining beans and
grounds from the Lower
Burr. Wipe down the Main
Body of the machine with
a damp, non-abrasive cloth.
NOTE: Do not clean any
Grinder parts or accessories
in the dishwasher.
11
Advertisement
Table of Contents
