Using Your Coffee Grinder; Grinding For Filter And Cafetière Coffee - Dualit CCG3 Instruction Manual & Guarantee

USING YOUR GRINDER
TO PREVENT OVERHEATING, DO NOT GRIND FOR MORE THAN THREE
MINUTES WITHIN ANY 10 MINUTE PERIOD. IF YOU EXCEED THREE
MINUTES, THE GRINDER WILL STOP: UNPLUG THE APPLIANCE AND
LEAVE TO COOL FOR 30 MINUTES, BEFORE PLUGGING BACK IN AND
RESUMING GRINDING. THE GRINDER IS FOR USE WITH ROASTED,
WHOLE BEAN COFFEE ONLY. DO NOT ATTEMPT TO GRIND OTHER
INGREDIENTS E.G. SPICES, SALT, PEPPER.
2
1
Unreel the required length With the machine unplugged,
of cord. It is important to check that the Upper Burr is
keep the cord short. Risk located correctly. Check that
of fire or electric shock. there are no foreign bodies in
Pack the excess cord length the Hopper.
in the cord tidy.
Fit the Bean Hopper onto
the Main Body by aligning the
arrow on the Hopper to the
unlock symbol on the Main
Body, then rotate clockwise
until the arrow aligns with the
"FINE" grind setting.
3
Add fresh coffee beans
to the Bean Hopper and
secure the Hopper Lid.
Remember to only grind
what you need. Rotate the
Bean Hopper anti-clockwise
until the arrow is aligned
with the desired grind
setting. Refer to Quick Start
Grind Settings on page 13.
Do not grind past setting
35 as the Bean Hopper
may become loose. Risk of
injury. Note: Check your
coffee beans for foreign
objects e.g. glass, nails or
stones. Risk of damage
and injury to persons.
8
GRINDING FOR FILTER
AND CAFETIÈRE COFFEE
2
1
The Dose Control Dial is a Lift the Container Cap away
rough guide for how many from the Container Lid.
cups of coffee are required. Slide the Grind Container
Turn the dial so that the into position, ensuring the
indicator aligns with the Container Cap is positioned
number of cups you wish to away from the Main Body.
make. The amount of coffee
dosed will change depending
on the grind size setting. See
page 10 for the Grind Chart.
4
Remove the Grind Container.
Tap to loosen grounds before
decanting. NOTE: Unplug after
use. Risk of electric shock
and fire.
3
Plug in the Power Cord
at the mains and press
the Grind Button to start
grinding. The Grinder will
stop automatically when
the selected dose has
been dispensed. You can
press the Grind Button
at any time to manually
stop grinding. NOTE: Do
not grind past the 'MAX'
indicator on the Grind
Container to prevent
overheating.
9