Operation - Klarstein DRYFY GRAND SMART 55 Manual

Continuously dehumidifying mode button and indication light
Press this button to program into continuously dehumidifying
mode, the indication light will turn green, the default RH is 20% and
the fan speed can be adjusted manually.
Tank full indicator light
The tank full indication light will turn on in red when the drain-
age tank is full. If light is on, empty the water out of the drainage
tank and make sure the tank is positioned properly.
Humidity Level & Timer digit display
The digits indicator features 11 functions:
1. When the unit is plugged in, it will show - -, the machine will be in standby
state.
2. When press the power button, it will indicate the room humidity level.
3. When you set the humidity, it will indicate the humidity that you have selected.
4. When you program the time for the unit to turn on and off, it will show the
hours.
5. Long press the timer button, it will indicate the room humidity level.
6. When the room temperature < 5 °C, it will show "TL".
7. When the room temperature > 38 °C, it will show "TH".
8. When the room humidity < 20%RH, it will show "LO".
9. When the room humidity > 92%RH, it will show "HI".
10. If the temperature sensor got failure, it will show "E1".
11. If the humidity sensor got failure, it will show "E2".

OPERATION

1. Turning the unit On:
When the unit is plugged in, a buzzer will beep and the humidity indicator
show the default humidity level at 50% with a low fan speed. Press POWER
button to start operation.
2. Stop operation. Press the POWER button to stop dehumidification:
Note : Never stop the unit by unplugging the supply cord.
Draining the collected water
When the drainage tank is full, the tank full indicator light will turn on, the
operation will stop automatically and the buzzer will beep 15 times to alert the
user that the water needs to be emptied from the drainage tank.
EN
23