Philips 27PT5441/37 User Manual page 17

y_ur TV can automatically _et
tse_Jbr local area (or _'able
TV) channels. Thi_ makes it easy
Jbr you to select only the TVsta-
tions in your area when the
CHANNEL (+), (-) buttons are
pressed.
Note: Make sure the antenna or
cable _ignal connection has been
completed beJbre AUTO PRO-
GRAM i_ activated.
i ress the MENU button on the remote to show the on-
screen nlenu.
Press the CURSOR UPA
or DOWN V buttons to
scroll through the on-screen
menu until the word Install
is highlighted.
Press the CURSOR RIGHT
> button to display the
Install menu features.
Press CURSOR UP A or DOWN V buttons to scroll
the Install features until the
words Auto Program are
highlighte&
Press the CUILSOR RIGHT > button to start the Auto
Program scanning of chan-
nels. Auto Programming will
store all available channels
in the TV's memory then
tune to the lowest available
channel when done.
When finished, press the
STATUS/EXIT button to
remove the menu from the
TV's screen.
When CABLE is selected, channels I-
125 are available.
When ANTENNA is selected, chan-
nels 2-69 are available.
When AUTO is selected, the TV will
automatically set itself to the correct
mode based on the type of signal it
detects when the AUTO PROGRAM
feature is activated.