Philips 27PT5441/37 User Manual page 11

_omponent
Video inputs provide
_..ffbr the highest possible color
and picture resolution in the play*
back of digital signal source mc[teri-
al, such as with DVD pluyers. The
color dij]brence signals (Pb, Pr) and
the luminance (Y) signal are con*
nected and received s'eparately,
which allows Jbr improved color
bandwidth inf!)rmation (not possible
when using composite video or S-
Video connections).
Connect the Component (Y, Pb, Pr) Video OUT jacks from
the DVD player (or similar
device) to the(Y, Pb, Pr) in(put)
jack on the TV. When using the
Component Video inputs, it is
best not to connect a signal to the
AV in Video Jack.
Connect the red and white
AUDIO CABLES to the Audio
(left and right) output jacks on
the rear of the accessory device
to the Audio (L and R) AVI in
Input Jacks on the TV.
_ lhrn the TV and the DVD (or
digital accessory device) ON.
Press the AV button or the
CH + or CH - buttons to
scroll the available channels
until CVI appears in the upper
left comer of the TV screer_.
Insert a DVD disc into the DVD player and press the
PLAY _2 button on the DVD
Player.
The description f_r the component video
connecto_ may differ depending on the
DVD player or accessory digital source
equipment used (f_r example, Y, Pb, Pr; Y,
B-Y, R-Y; Y,Cl; Cb) Alihough abbrevia-
tlons and Termsmay vary, the Ielters b and r
stand fbr lhe blue and red color eomponen_
signal connectors, and Y indicates *heluml-
nance signal Refbr to your DVD or digital
accessory owner's manttal for definitions and
connection details
The CVI connection wilt be dominate over the AV1
in Video Input. When a Component Video Device is
connected as descllbed, it is best not to have a video
signal connected to d_e AV1 in Video Input jack.
Back of TV
(Green, Blue, White)
Red)
Equipped with
Component Video
Outputs
®®®
_®®
0®0