tema DIAL-103A Technical Installation Manual
  1. Manuals
  2. Brands
  3. tema Manuals
  4. Recording Equipment
  5. DIAL-103A
  6. Technical installation manual

tema DIAL-103A Technical Installation Manual

Gsm gateway voice interface for analog trunk interface of pbx (fxs)
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
analog trunk interface of PBX (FXS)
TECHNICAL – INSTALLATION MANUAL
Recommendations
1.
Use only original spare parts and consumables supplied by Tema Telecomunicazioni Srl for this equipment. The company shall
not be held responsible for any damage caused by the use of materials that they have not supplied.
2.
The device has been carefully manufactured and tested. In any case, the product is not recommended for use in situations in
which incorrect operating may result in damage to persons and/or property.
3.
We recommend that you carefully read all this manual before starting to use the device.
4.
Do not expose the device to sunlight and protect it from sources of heat, dust, humidity and chemical agents.
5.
This manual is the property of Tema Telecomunicazioni Srl and any duplication and reproduction, even partial, as well as
storage on any type of media is forbidden without written permission from Tema Telecomunicazioni Srl.
Revision
Date
3
19/05/2010
MAS-DIAL103A-REV03EN
TEMA TELECOMUNICAZIONI S.r.l.
Telecommunications - Electronics
DIAL-103A
GSM Gateway Voice Interface for
DIAL-103A Version HW 1.00 FW 2.04
Made in Italy by TEMA TELECOMUNICAZIONI S.r.l.
Revision reason
Update
Prepared
GBC
Checked/Approved
DP
Page 1 of 16

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DIAL-103A and is the answer not in the manual?

Questions and answers

Related Manuals for tema DIAL-103A

Summary of Contents for tema DIAL-103A

  • Page 1 Do not expose the device to sunlight and protect it from sources of heat, dust, humidity and chemical agents. This manual is the property of Tema Telecomunicazioni Srl and any duplication and reproduction, even partial, as well as storage on any type of media is forbidden without written permission from Tema Telecomunicazioni Srl.
  • Page 2 GSM Gateway Interface DIAL-103A TEMA TELECOMUNICAZIONI SRL DICHIARAZIONE DI CONFORMITÀ CE DECLARATION OF CONFORMITY CE La sottoscritta società TEMA TELECOMUNICAZIONI SRL con sede in Via C. Girardengo, 1/4 - 20161 MILANO dichiara che il prodotto Interfaccia GSM Gateway voce – GSM Gateway...
  • Page 3 GSM Gateway Interface DIAL-103A TEMA TELECOMUNICAZIONI SRL IMPORTANT INFORMATIONS REGARDING THE RECOVERY AND RECYCLING OF THIS ELECTRONIC DEVICE The crossed-out wheeled bin symbol below indicates that this electronic equipment is intended to be disposed in a separate collection and not in an unsorted municipal waste, in order to provide for the treatment of WEEE (Waste Electrical and Electronic Equipment) using best available recovery and recycling techniques.

  • Page 4: Table Of Contents

    GSM Gateway Interface DIAL-103A TEMA TELECOMUNICAZIONI SRL TABLE OF CONTENTS PAGE INTRODUCTION OF THE DIAL-103A GATEWAY............5 DIAL-103A CHARACTERISTICS ................... 5 PARTS COMPRISING THE SYSTEM (PACKING LIST) ..........6 TECHNICAL SPECIFICATIONS..................6 DEVICE DESCRIPTION ....................7 5.1. F ..........................7 RONT AND REAR VIEWS INSTALLATION AND DIAGNOSTICS................

  • Page 5: Introduction Of The Dial-103A Gateway

    PBX analog trunk interface and plug in the antenna and power supply cable: DIAL-103A is now ready to use. Moreover, the unit is provided with a set of LED to ease recognition of the system and GSM link’s status.

  • Page 6: Parts Comprising The System (Packing List)

    • Access to the module to know GSM signal strength via DTMF commands Services for inbound calls (converted from GSM to wired line): DIAL-103A receives calls from the GSM network and reroutes them to the PBX (or telephone) in wired line analog mode. Moreover: •...

  • Page 7: Device Description

    6. INSTALLATION AND DIAGNOSTICS 6.1. Installation of the DIAL-103A unit DIAL-103A has a GSM module that requires a SIM card from the selected telephone operator to work. In addition to resting on table, desktop or shelf, the DIAL-103A unit can be vertically wall-mounted.

  • Page 8: Operational And Diagnostic Indicators

    GSM numbers, depending on their prefixes. If the PBX is not provided with LCR, it is still possible to select DIAL-103A when a GSM mobile number is dialed by setting the selection code of the trunk interface the Gateway is connected to, and dialing this code before the GSM number to call.

  • Page 9: Inhibited Number Table

    Some numbers, area codes or parts of numbers stored in a table (fields 250-259) can be inhibited so that DIAL-103A will not make calls to these numbers. For example, by entering “06” all calls to the Rome wired line network will be inhibited, while by entering “02615441”, calls to that complete number will be inhibited.

  • Page 10: Access To The Module For Remote Programming Via Gsm

    7.2.3. Access to the module for remote programming via GSM Call DIAL-103A at the number of its SIM card, wait for someone to answer the line downstream and within the first 30 seconds of conversation, key ### (3 pound signs) + one of the Passwords enabling the selected function (Alarm Management, Relay Management or Parameter Programming).

  • Page 11: Monitoring The Gsm Signal Strength

    103A confirms the value entered after receiving one DTMF digit. If the parameter is 3-digit long and the user enters only 2 digits, DIAL-103A will confirm the entry 3 seconds after the user entered the second digit; when 3 digits are entered, the entry is confirmed immediately after receipt of the third digit to signal that the field is full and, at the same time, speed up programming.

  • Page 12: Programming Via Sms

    Since the programming SMS message may not be received immediately (it depends exclusively on the mobile telephone operator), as soon as DIAL-103A receives the programming SMS message and correctly executes it, it will send a confirmation message to the user containing a summary of the programming message received.

  • Page 13: Restoring Default Parameters

    (in milliseconds) Range: from 0 to 65535 Delay for dialing Maximum time allowed for dialing before 221 # first digit DIAL-103A emits a not-available tone. 30000 (milliseconds) Range: from 0 to 65535 Max. outbound Timeout for single outbound conversation. conversation time...
  • Page 14 To set the ring signal frequency value 0 = set to 25 Hz 291 # Ring frequency 1 = set to 50 Hz Range: 0,1 Allow or deny the DIAL-103A roaming registration to the GSM network. 292 # Roaming Enable 0= Roaming disabled 1= Roaming enabled...
  • Page 15 GSM Gateway Interface DIAL-103A TEMA TELECOMUNICAZIONI SRL Field Description Field max Enter Your Parameter Name Default Number Range = possibile values length (digits) Settings 517 # CLI table num. 13 As above. 518 # CLI table num. 14 As above.

  • Page 16: A1 - Echo Cancellation

    Note: for information regarding how to set DIAL-103A operative parameters, refer to section of parameters programming. Note: after setting at least one of the followings parameters, switch off and on DIAL-103A in order to let the changes have effect. Note: please contact TEMA technical staff if the echo cancellation doesn’t work also after you have enabled the function with the “020”...

Table of Contents