Subscribe to Our Youtube Channel
Related Manuals for SCHUNK TENDO Turn DSE
Summary of Contents for SCHUNK TENDO Turn DSE
- Page 1 Assembly and operating manual TENDO Turn DSE Hydraulic expansion toolholder Translation of Original Operating Manual...
- Page 2 Best regards, Your SCHUNK team Customer Management Tel. +49-7133-103-2500 Fax +49-7133-103-2239 cms@de.schunk.com Please read the operating manual in full and keep it close to the product. 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520...
-
Page 3: Table Of Contents
5.2.2 Clamping the tool with two clamping screws........23 5.3 Unclamping the tool ................25 5.3.1 Unclamping the tool with a clamping screw........25 5.3.2 Unclamping the tool with two clamping screws ........ 25 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... - Page 4 7.2.4 Check and lubricate the clamping screw.......... 31 8 Troubleshooting................... 32 9 Disassembly ..................33 9.1 Basic information................33 9.2 Disassembly of the product ..............33 10 Storage....................34 11 Disposal ..................... 35 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520...
-
Page 5: General
Non-observance can lead to irreversible injury and even death. CAUTION Dangers for persons! Non-observance can cause minor injuries. CAUTION Material damage! Information about avoiding material damage. 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... -
Page 6: Definition Of Terms
Hexagon socket wrench for length adjustment GZB-S intermediate sleeves for clamping several different shank diameters GZB-S sleeve remover for removing intermediate sleeves Cleaning brush for cleaning clamping diameters 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... -
Page 7: Basic Safety Notes
[/ 13]. The maintenance and storage instructions are not observed [/ 28]. } 7 The product is used with heat shrinking technology. The product is used in explosive environments. 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... -
Page 8: Notes On Safe Operation
Follow the country-specific applicable safety, accident prevention, and environmental protection regulations for the application field of the product. Use mechanical screwdrivers only after approval by SCHUNK. 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... -
Page 9: Personnel Qualification
Work on the product Necessary qualification Transport Qualified personnel/ instructed person Assembly/disassembly Specialist personnel Settings/functional testing Specialist personnel Operation Qualified personnel/ instructed person Maintenance/troubleshooting Specialist personnel/ SCHUNK service personnel Disposal Specialist personnel/ SCHUNK service personnel 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... -
Page 10: Personal Protective Equipment
Use suitable assembly and transport devices*. Take precautions against pinching and crushing. * Assembly and transportation devices must be able to carry at least twice the attached weight. 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... -
Page 11: Constructional Changes
After a malfunction, ensure that the product is able to function properly and no increased risks have arisen. Do not recommission the product until the malfunction has been rectified. 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... -
Page 12: Hazardous Points On The Product
Danger due to Assembling/disassembling Cutting the product/Clamping the tool Clamping the tool Crushing risk Clamping the tool The expansion sleeve bursting Assembling/disassembling Crushing risk the product 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... -
Page 13: Technical Data
+10 to +30 Cleaning temperature 0 to +60 Test temperature clamping force control +20 to +25 Maximum temperature, clamping without tool NOTE: The temperatures refer to the product. 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... -
Page 14: Minimum Clamping Depth
Tool shanks with projections/markings are difficult or impossible to fit and can impair the run-out accuracy of the overall system. 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... -
Page 15: Further Information On The Product
Data matrix code Open the website schunk.com and enter the 8-digit serial number ("SN:") located on the product in the search field. For further information, visit schunk.com/serialisierung 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... -
Page 16: Design And Description
Design and description 4 Design and description 4.1 Design NOTE: Illustration may differ from the actual design. Position Description Clamping diameter Length-setting screw Minimum clamping depth 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... -
Page 17: Functional Description
The thin-walled expansion sleeve then returns radially to its exact home position. The tool can be removed. 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... -
Page 18: Operation
Make sure the attachments and operating components present are installed and fitted correctly. Check the clamping force regularly. Take appropriate protective measures to secure danger zones. Wear suitable protective equipment. 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... - Page 19 Risk of injury due to ejected parts! The max. speed of rotation of the machine/automated system must be reduced when using long, projecting or heavy tools and with extensions. 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520...
- Page 20 Observe the minimum clamping depth of the tool. The tool must be free of burrs and dirt on the shank. Do not adjust the tool length when the tool is clamped. 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520...
-
Page 21: Clamping The Tool
Do not combine multiple extensions (e.g. TENDO SVL). The product may not be clamped without a tool above 25°C. Only clamp permissible tool shank types [/ 14]. } 3.5 Position Description Clamping screw 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... - Page 22 Check that the tool is firmly in place. IMPORTANT! Safe clamping of the tool is only achieved when the clamping screw is screwed in as far as the stop! 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520...
-
Page 23: Clamping The Tool With Two Clamping Screws
The product may not be clamped without a tool above 25°C. Only clamp permissible tool shank types [/ 14]. } 3.5 Position Description Locking screw Clamping screw B Clamping screw A 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... - Page 24 Check that the tool is firmly in place. IMPORTANT! Safe clamping of the tool is only achieved when the clamping screw is screwed in as far as the stop! 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520...
-
Page 25: Unclamping The Tool
IMPORTANT! The air bleed screw is secured with a pin or resin and must not be unscrewed! 5.4 Changing the tool Unclamp and remove the tool } 5.3 [/ 25]. Join and clamp the new tool [/ 21]. } 5.2 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... -
Page 26: Assembly
CAUTION Risk of possible damage to the product! When transporting and handling the product, ensure that it is not damaged by knocks, impact, etc. 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... -
Page 27: Assembly Of The Product
Check that the product is in the correct position and securely clamped in the machine. Important! Safe clamping of the product in the machine must be ensured! 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... -
Page 28: Maintenance
Wear suitable protective equipment, especially heat-resistant gloves. WARNING Risk of injury due to sharp edges and rough or slippery surfaces! Wear suitable protective equipment, especially protective gloves. 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... -
Page 29: Intervals And Tasks
For maintenance intervals with two or more specifications, the specification that applies first is valid. 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... -
Page 30: Cleaning The Clamping Surface
The clamping force is no longer sufficient if the test shaft can be pulled out of the product with little effort using two fingers. In this case, send the product to SCHUNK for inspection. 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... -
Page 31: Check And Lubricate The Clamping Screw
Replace if necessary. Lubricate the clamping screw and actuating thread. Screw the clamping screw into the product. Check the clamping force [/ 30]. } 7.2.3 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... -
Page 32: Troubleshooting
If you have any questions regarding troubleshooting, our technical after-sales service is available during our business hours: Service telephone: +49-7133-103-2956 service.toolholder@de.schunk.com 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... -
Page 33: Disassembly
Remove the product. If necessary, remove tool [/ 25]. } 5.3 NOTE: To avoid damage, only place the product on a clean and soft surface. 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... -
Page 34: Storage
Only store the product in dry rooms. Protect the product from major temperature fluctuations. Comply with the storage temperature specified in the technical data. Store the product in a suitable transport container. 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... -
Page 35: Disposal
Disposal 11 Disposal Follow local regulations on dispatching product components for recycling or proper disposal. Alternatively, you can return the product to SCHUNK for correct disposal. 01.00 | TENDO Turn DSE | Assembly and operating manual | en | 1561520... - Page 36 SCHUNK SE & Co. KG Toolholding and Workholding | Gripping Technology | Automation Technology Bahnhofstr. 106 – 134 D-74348 Lauffen/Neckar Tel. +49-7133-103-0 info@de.schunk.com schunk.com Folgen Sie uns I Follow us Wir drucken nachhaltig I We print sustainable...
Need help?
Do you have a question about the TENDO Turn DSE and is the answer not in the manual?
Questions and answers