Related Manuals for SCHUNK TENDO Silver
Summary of Contents for SCHUNK TENDO Silver
- Page 1 Assembly and operating manual TENDO Silver Hydraulic expansion toolholder Translation of Original Operating Manual...
- Page 2 Imprint Imprint Copyright: This manual is protected by copyright. The author is SCHUNK SE & Co. KG. All rights reserved. Technical changes: We reserve the right to make alterations for the purpose of technical improvement. Document number: 1561439 Version: 01.00 | 31/08/2023 | en...
-
Page 3: Table Of Contents
4.2 Functional description................17 5 Operation ................... 18 5.1 Basic information................18 5.2 Clamping the tool................20 5.3 Unclamping the tool ................21 5.4 Tool changes ..................21 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... - Page 4 7.2.4 Check and lubricate the clamping screw.......... 27 8 Troubleshooting................... 28 9 Disassembly ..................29 9.1 Basic information................29 9.2 Disassembly of the product ..............29 10 Storage....................30 11 Disposal ..................... 31 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439...
-
Page 5: General
Dangers for persons! Non-observance can lead to irreversible injury and even death. CAUTION Dangers for persons! Non-observance can cause minor injuries. CAUTION Material damage! Information about avoiding material damage. 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... -
Page 6: Definition Of Terms
Hexagon socket wrench for length adjustment GZB-S intermediate sleeves for clamping several different shank diameters GZB-S sleeve remover for removing intermediate sleeves Cleaning brush for cleaning clamping diameters 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... -
Page 7: Basic Safety Notes
The product may only be used and operated within the scope of the technical data and the specifications in this manual, [/ 10]. } 3 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... -
Page 8: Inappropriate Use
To avoid product damage, the transport and handling of the product must be adapted according to the version, weight and packaging of the product. If necessary, use additional aids. 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... -
Page 9: Hazardous Points On The Product
Position Danger when Danger due to Assembling/disassembling Cutting the product/Clamping the tool Clamping the tool Crushing risk Clamping the tool The expansion sleeve bursting Assembling/disassembling Crushing risk the product 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... -
Page 10: Technical Data
2.5 x clamping diameter or max. 50 mm) NOTE: The permissible transmittable torque applies to tool shank smallest dimension h6, tool shank oiled. The load limits of the spindle holder must be observed. 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... -
Page 11: Ambient Conditions And Operating Conditions
+10 to +30 Cleaning temperature 0 to +60 Test temperature clamping force control +20 to +25 Maximum temperature, clamping without tool NOTE: The temperatures refer to the product. 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... -
Page 12: Maximum Rpm
50,000 50,000 50,000 50,000 50,000 50,000 50,000 50,000 25,000 25,000 Clamping Ø Max. speed of rotation [inch] [RPM] 50,000 50,000 50,000 50,000 50,000 25,000 1 1/4 25,000 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... -
Page 13: Minimum Clamping Depth
Technical data 3.4 Minimum clamping depth Clamping Ø Minimum clamping depth [mm] [mm] Clamping Ø Minimum clamping depth [inch] [mm] 1 1/4 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... -
Page 14: Usable Tool Shank Types
Tool shanks with diameters outside the tolerance h6 cannot be joined or no transmittable torque is guaranteed. Tool shanks with projections/markings are difficult or impossible to join. 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... -
Page 15: Further Information On The Product
Data matrix code Open the website schunk.com and enter the 8-digit serial number ("SN:") located on the product in the search field. For further information, visit schunk.com/serialisierung 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... -
Page 16: Design And Description
4 Design and description 4.1 Design NOTE: Illustration may differ from the actual design. Position Description Clamping screw Length-setting screw Clamping diameter Minimum clamping depth Projecting length L1 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... -
Page 17: Functional Description
Screwing back the clamping screw causes a reduction of the pressure in the piston chamber and the expansion chamber. The thin-walled expansion sleeve then returns radially to its exact home position. The tool can be removed. 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... -
Page 18: Operation
Ensure correct installation and seating of existing add-on and functional components. Check clamping force regularly. Take appropriate protective measures to secure danger zones. Wear suitable protective equipment. 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... - Page 19 Observe the minimum clamping depth of the tool. The tool must be free of burrs and dirt on the shank. Do not adjust the tool length when the tool is clamped. 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439...
-
Page 20: Clamping The Tool
Check that the tool is firmly in place. Mount the product } 6 [/ 22]. IMPORTANT! Safe clamping of the tool is only achieved when the clamping screw is screwed in until it reaches the stop! 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... -
Page 21: Unclamping The Tool
IMPORTANT! The air bleed screw is secured with a pin or resin and must not be unscrewed! 5.4 Tool changes Unclamp and remove the tool [/ 21]. } 5.3 Join and clamp the new tool } 5.2 [/ 20]. 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... -
Page 22: Assembly
Wear suitable protective equipment, especially safety boots and protective gloves. CAUTION Risk of damage to the product. When transporting and handling the product, ensure that it is not damaged by knocks, impacts, etc. 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... -
Page 23: Assembly Of The Product
Check that the product is in the correct position and securely clamped in the machine. Important! Safe clamping of the product in the machine must be ensured! 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... -
Page 24: Maintenance
Wear suitable protective equipment, especially heat-resistant gloves. WARNING Risk of injury due to sharp edges and rough or slippery surfaces. Wear suitable protective equipment, especially protective gloves. 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... -
Page 25: Intervals And Tasks
Clean the clamping bore and groove with a cleaning agent containing solvents. Carefully remove any stubborn dirt with a suitable tool } 1.4 [/ 6]. Wipe the surfaces dry with a clean cloth. 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... -
Page 26: Cleaning The Product
The clamping force is no longer sufficient if the test shaft can be pulled out of the product with little effort using two fingers. In this case, send the product to SCHUNK for inspection. 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... -
Page 27: Check And Lubricate The Clamping Screw
Replace if necessary. Lubricate the clamping screw and actuating thread. Screw the clamping screw into the product. Check the clamping force } 7.2.3 [/ 26]. 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... -
Page 28: Troubleshooting
Use the tool shank run-out recesses without recesses accuracy If you have any questions regarding troubleshooting, our technical after-sales service is available during our business hours: Service telephone: +49-7133-103-2956 service.toolholder@de.schunk.com 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... -
Page 29: Disassembly
Remove the product. If necessary, remove tool } 5.3 [/ 21]. NOTE: To avoid damage, only place the product on a clean and soft surface. 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... -
Page 30: Storage
Only store the product in dry rooms. Protect the product from major temperature fluctuations. Comply with the storage temperature specified in the technical data. Store the product in a suitable transport container. 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... -
Page 31: Disposal
Disposal 11 Disposal Follow local regulations on dispatching product components for recycling or proper disposal. Alternatively, you can return the product to SCHUNK for correct disposal. 01.00 | TENDO Silver | Assembly and operating manual | en | 1561439... - Page 32 SCHUNK SE & Co. KG Toolholding and Workholding | Gripping Technology | Automation Technology Bahnhofstr. 106 – 134 D-74348 Lauffen/Neckar Tel. +49-7133-103-0 Fax +49-7133-103-2399 info@de.schunk.com schunk.com Folgen Sie uns I Follow us Wir drucken nachhaltig I We print sustainable...
Need help?
Do you have a question about the TENDO Silver and is the answer not in the manual?
Questions and answers