Table of Contents
Advertisement
L28 Initial Camera Settings
-
Press the
Easy Auto or Scene Modes.
-
Set Flash to
Preset the following functions in the
-
Set Image Mode to "20m."
-
Set White Balance to "Auto."
-
Set Continuous to "S" Single.
-
Set Color Options to V1 "Vivid Color."
Preset the following functions in the
-
Set Autofocus Mode to "AF-S."
Preset the following functions in the
-
Set Time Zone and Date.
-
Set Electronic VR to "Auto.
-
Set AF assist to "OFF." A strobe focusing light is recommended to
assist AF underwater.
-
Set Auto off to "5m" and Sleep mode to "OFF."
-
Insert and format a SD or SDHC memory card.
For more accurate colors, we recommend setting manual white balance
underwater using a white slate or white sandy bottom. Manual white
balance should be reset for each working depth due to color absorption
caused by the water. When adding a UR-Pro color filter, reset manual
white balance.
Note: Enable Macro
overexposure occurs, back away from the subject and zoom in. If
overexposure continues, use "-" exposure compensation.
4
button and set the shooting mode to
"Fill Flash."
mode when shooting close-up subjects. If
Auto Mode, not
Menu Settings:
Menu Settings:
Menu Settings:
Advertisement
Table of Contents
